Misfire symptoms, no CEL. OBD1 2JZGE
06-21-14, 09:56 PM
#1
Driver
Thread Starter
iTrader: (1)
Join Date: Dec 2005
Location: GA
Posts: 144
Likes: 0
Received 0 Likes
on
0 Posts
Misfire symptoms, no CEL. OBD1 2JZGE
Trying to see if anyone else has experienced something like the problem I'm having..
Purchased the car, drove it and it was fine.
Left it parked for ~4 days while I was working on cleaning her up and started her up. Idles good for about 2 minutes, then starts misfiring/idle dips. Not sure if oil or gas, but there is smoke during the misfiring episode. About 5 minutes later and when the car is completely hot (i assume), it doesn't misfire/hesistate at idle but does it randomly.
I can't see the rings going bad so suddenly, but the smoke (assuming it's oil) can mean bad rings, PCV or EGR?
Purchased the car, drove it and it was fine.
Left it parked for ~4 days while I was working on cleaning her up and started her up. Idles good for about 2 minutes, then starts misfiring/idle dips. Not sure if oil or gas, but there is smoke during the misfiring episode. About 5 minutes later and when the car is completely hot (i assume), it doesn't misfire/hesistate at idle but does it randomly.
I can't see the rings going bad so suddenly, but the smoke (assuming it's oil) can mean bad rings, PCV or EGR?
06-24-14, 12:41 PM
#6
Driver
Thread Starter
iTrader: (1)
Join Date: Dec 2005
Location: GA
Posts: 144
Likes: 0
Received 0 Likes
on
0 Posts
Seafoamed the engine through the brake booster line. Used about a half can of it and it smoked for a good while, so I will see how she idles tonight. Ran her around the block and she was running fine, but you never know. lol
Thread
Thread Starter
Forum
Replies
Last Post
Grantch522
ES - 1st to 4th Gen (1990-2006)
4
02-14-16 07:39 AM
