Performance & Maintenance Engine, forced induction, intakes, exhausts, torque converters, transmissions, etc.

Please help !! SC problem

Old 05-25-14, 11:36 AM
  #1  
SC2JZ420
Driver School Candidate
Thread Starter
 
SC2JZ420's Avatar
 
Join Date: Feb 2014
Location: Florida
Posts: 11
Likes: 0
Received 0 Likes on 0 Posts
Default Please help !! SC problem

I recently bought this 1995 sc300 about a month and half ago and little by little I've been replacing parts alternator , starter , battery , fuel filter ,so anyways yesterday night I put gas (93 octane) and as soon as I started the car it started misfiring a little bit . Then I drove for a minute or so with a steady throttle position and the rpm will drop for a second then pick up normally . I made it home with it misfiring abit. Now this morning it cranks and starts but immidiatly shuts off. Any suggestions? I pulled 3 codes 14 ignition signal , 25 lean a/f ratio,and 71 egr system malf. I've always had 71 but 14 and 25 are new , I also was gonna do the fuel pump mod to 12v but when I looked it's been done already
Old 05-25-14, 11:42 AM
  #2  
SC2JZ420
Driver School Candidate
Thread Starter
 
SC2JZ420's Avatar
 
Join Date: Feb 2014
Location: Florida
Posts: 11
Likes: 0
Received 0 Likes on 0 Posts
Default

Can this possibly be the igniter?
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
SC2JZ420
Performance & Maintenance
5
06-16-14 11:22 PM
soulific
Performance & Maintenance
9
10-05-10 10:23 PM
BP_VVt-i
GS - 2nd Gen (1998-2005)
15
11-04-09 07:37 PM
codetoad
Performance & Maintenance
5
06-03-07 06:20 PM


Thread Tools
Search this Thread
Quick Reply: Please help !! SC problem



All times are GMT -7. The time now is 01:49 AM.