Borg warner s360 on 1jz
#16
I just read another thread with a guy running an s360 .94 on a 1.5j and he ran a divided manifold with two small wastegates (one per side) which he thought really helped. he thought it worked great on his car and didnt have too much lag
Threads in case your interested:
http://jzxproject.com/bbs/index.php?...c=1413&page=18
(talks quite a bit about turbo setup on p20-28 or so)
also
https://www.clublexus.com/forums/bui...-jzs161-2.html
Threads in case your interested:
http://jzxproject.com/bbs/index.php?...c=1413&page=18
(talks quite a bit about turbo setup on p20-28 or so)
also
https://www.clublexus.com/forums/bui...-jzs161-2.html
#20
Driver School Candidate
Thread Starter
Join Date: Jan 2014
Location: on
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
I'm just gonna be running stock motor with fuel pump 550s and resistor pack for now ...front mount intercooler with a 3 inch full exhaust, I have a twin scroll t4 manifold that I wanted to use also. The s360 is going to be a little laggy for my liking ...looking into the s200 series but for some reason they recommend this huge 1.22 ar
#21
Driver School Candidate
Join Date: Mar 2013
Location: SoCal
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
I have 2 new "s357" turbos (57mm compressor instead of 60mm) laying around. 81/76 with .88AR t4 single scroll housing and 80/76 with 1.00 t4 twinscroll housing.
I think the first one will do fine on a stock 1j.
I think the first one will do fine on a stock 1j.
Thread
Thread Starter
Forum
Replies
Last Post