2JZGTE VVTI questions
#1
Driver School Candidate
Thread Starter
Join Date: Oct 2013
Location: KS
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
2JZGTE VVTI questions
Im getting my parts list together now and I have a few questions for the guys that have already been through this process.
#1. I am keeping the JDM auto that comes with the motor set and its going into an auto car. Will I have to have a custom drive shaft or will I be able to use the one I have.
#2. Since I have a JDM motor will the turbo outlets be the same as the USDM. Just curious as to if the USDM downpipe will mate up to it properly.
Also any precautions or info that would help in the swap would be greatly appreciated.
#1. I am keeping the JDM auto that comes with the motor set and its going into an auto car. Will I have to have a custom drive shaft or will I be able to use the one I have.
#2. Since I have a JDM motor will the turbo outlets be the same as the USDM. Just curious as to if the USDM downpipe will mate up to it properly.
Also any precautions or info that would help in the swap would be greatly appreciated.
#3
gte & na-t
iTrader: (44)
Join Date: Jan 2007
Location: Maryland /Germantown
Posts: 5,139
Likes: 0
Received 7 Likes
on
7 Posts
The flange iirc is different , its a Y still flange but the newer still one may work from the 99-2000 SC400.
For example even gs guys that swap these engines in their GSs they get the swap with the front half because the GS front half will not work im not usre why..
For example even gs guys that swap these engines in their GSs they get the swap with the front half because the GS front half will not work im not usre why..
#4
Driver School Candidate
Thread Starter
Join Date: Oct 2013
Location: KS
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
Sorry it took me so long to get back on here, I was on vacation. The car is a 97 SC300 Auto tranny. So when ordering the DP I will have to order one for a JDM VVTi specific motor?
Thread
Thread Starter
Forum
Replies
Last Post