2jz610

I can't get my mph, tach or temp to work on dash.. I am using a v160 6 speed trans.. Any suggestions..

2jz610

I guess I should
Also
Mention I'm running a aem computer... I know the v160 has a speed sensor on it if I'm not mistaken soo I'm pretty sure I have to hook up the mph gauge threw that.. Coolant ill have to hard wire I guess.. Gas as well.. But rmp I'm not sure of..

soarer13oy

iTrader: (13)

it should all be on the body plug. I cant quite remember which one to be exact but im sure its probably not wired into the body plug.

stockhatch

iTrader: (12)

^^^^^^^ what he said. Who wired the swap? It could get really messy depending on what was hacked out or forgotten.

2jz610

Broadway performance and I still can't fig it out blah. Everything is plugged in that I can see but I haven't taken dash off n don't want too.

99SC42

iTrader: (44)

^^ Who did the wiring?

hmhatch

iTrader: (1)

You don't need to remove the dash. Everything is down at the passenger side kick panel ecu area.

CatManD3W

iTrader: (18)

Start on post #83

This should help to understand what wires control functions on the car....

https://www.clublexus.com/forums/per...de-easy-6.html

There is alot of other useful information on this thread Gerry made for CL community....I personally built my own wiring harness by using this thread.....

soarer13oy

iTrader: (13)

http://wilbo666.pbworks.com/w/page/4...odyLoomPinouts

2jz610

Figured it out. Ended up being several dash harness grounds.. So everything works now except mph gauge. But that's due to not setting up v160 sensor wiring yet.. Thanks for everyone's help