Exhaust fitment question
#1
Driver School Candidate
Thread Starter
iTrader: (2)
Join Date: Mar 2013
Location: ca
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
Exhaust fitment question
Hey everyone. I did a search but couldn't find a definite answer. But after the y pipe, are 300/400 exhaust the same? Reason I ask is that someone is selling an exhaust off his 400, but it starts after the y pipe. I just want to know if it will fit on my 300.
#3
Driver School Candidate
Join Date: Aug 2012
Location: Maine
Posts: 35
Likes: 0
Received 0 Likes
on
0 Posts
if by after the y-pipe you mean something like axelbacks? then yeah its the same for sure, other than that im not 100% but chances are theyre the same past the cats
#4
on the 400 the front section comes from two exhaust manifolds out both sides of engine. and join up.
on the 300 the front section comes from two exhaust manifolds out one side the engine. and join up.
rear section is same.
on i6 engine 300 you have intake manifold on one side and exhaust manifold on other side.
on v8 engine 400 you have 2 exhaust manifolds on both sides. intake manifold is on top.
don't get ripped off on no-brand-obx-megan-style-3A-racing-axlebacks. i've seen perople try and sell them for more than what they are new shipped from ebay.
try too see if they are a brand like greddy,tanabe..ect
on the 300 the front section comes from two exhaust manifolds out one side the engine. and join up.
rear section is same.
on i6 engine 300 you have intake manifold on one side and exhaust manifold on other side.
on v8 engine 400 you have 2 exhaust manifolds on both sides. intake manifold is on top.
don't get ripped off on no-brand-obx-megan-style-3A-racing-axlebacks. i've seen perople try and sell them for more than what they are new shipped from ebay.
try too see if they are a brand like greddy,tanabe..ect
Last edited by SCstone; 10-01-13 at 12:50 AM.
Thread
Thread Starter
Forum
Replies
Last Post
SOLID300
Performance & Maintenance
17
10-05-11 11:51 PM