primary wire to pasenger coil NO Voltage..help
#1
Lead Lap
Thread Starter
Join Date: Mar 2006
Location: OR
Posts: 434
Likes: 0
Received 0 Likes
on
0 Posts
primary wire to pasenger coil NO Voltage..help
Hello all,
I thought I had a coil problem but after both coils checked out, I went to check the harness side to see if I was getting power. Drivers side primary at 11.2mV and secondary at 2.1mV Passengers side 2.0mV secondary and 0.0pmV primary. Where to go from here? What does it go through before getting to the coil, I need to trace it back from the coil, but don't want to tear the intake plug covers etc. Anybody got a wiring diagram they can send my way. Any help much appreciated.
Thank you,
Ryan.
1992 SC400
I thought I had a coil problem but after both coils checked out, I went to check the harness side to see if I was getting power. Drivers side primary at 11.2mV and secondary at 2.1mV Passengers side 2.0mV secondary and 0.0pmV primary. Where to go from here? What does it go through before getting to the coil, I need to trace it back from the coil, but don't want to tear the intake plug covers etc. Anybody got a wiring diagram they can send my way. Any help much appreciated.
Thank you,
Ryan.
1992 SC400
Thread
Thread Starter
Forum
Replies
Last Post
lastmohcnz
GS - 2nd Gen (1998-2005)
0
04-06-17 01:30 PM