SexCoupe

iTrader: (6)

Well first off hello to all

im having a problem locating the sensor im suppose to be putting this resistor in ive searched lextreme,google,and here and no one seems to answer where it goes on a "1992" sc400 i know where it is for the v6s and even the 95 and up v8s but not the 92...

there are three sensors i see one by the diagnostic box(black sensor) and one the exact opposite by the rear intake mani(turqoise sensor) and one behind the intake manifold(grey sensor)


ive tried all 3 with the resistor still throwing the code ive deleted the egr system so im not sure wuts going on ive reset the ecu each time i tried one all i need is some kind of help thanks

hershsc400

I have a 96 and i place the resistor in the connector of the egr valve itself, and i still have a CEL. I am also wondering where it goes... I've also had this problem for a while.

SexCoupe

iTrader: (6)

someones gotta know somthing im not the only one with a 92 sc400???

1SICSC4

Well we all know any SC400 regardless of the year has the 4.0 1uz-fe V8. Thats what makes it a 400. There has never been a V6 SC! Do some more research about you car and your motor man.

SexCoupe

iTrader: (6)

wtf ??just a typo homie everybody knows what i ment..... garaunteed i know more about both engines than you kick rocks with that lame *** post

MODs if you dont mind...delete this thread since it seems to be useless

JakeBreyck

iTrader: (1)

I deleted my egr by just removing the valve and blocking off the holes in the side of the intake manifold. I didn't have to use any resisters. and no cel, ok well to be fair no egr related cel, i did have a cel from no secondary o2s that i ignored. 1992 motor btw.

SexCoupe

iTrader: (6)

wow thats weird redphoenix said the same thing i dont understand why mines is throwing the code.....do u have and pictures of the egr side of the engine by any chance?

JakeBreyck

iTrader: (1)

stock computer, not really the side but you can kinda see.


Heres a good shot of the block off plate.


And heres a current pic, now none of that crap matters, only sensors i have now are crank, iat, water temp, map, and the motor will run with just the cps. now running an electromotive tech-gt ecu.

hamzeh1980

what motor is this

oldManTan

its a 1uz, what the thread is about?