Converting fan system from hydraulic to electric? Pulley found!
02-17-13, 03:41 PM
#1
Converting fan system from hydraulic to electric? Pulley found!
I am in the process of doing a timing belt/water pump on my SC400, and I have been wanting to delete the entire hydraulic system (not just plug it and loop the hoses).
as many of you know you need a LS400 fan idler pulley and bracket. its quite hard to fin them unless you can find a completely trashed junk motor. you can buy the bracket but the pulley is the hard part to find.
I found that Lexus of South Atlanta has a great parts section on their site and they have the pulley for a great price (i was expecting at least $200 as that's what Sewell quoted me for the hydraulic pulley). SO, you can buy the pulley on their site for $50 (70 shipped for me) and then get a bracket on Ebay for around 50-60.
Just thought I'd post this up since as I was searching the market place for the pulley and bracket combo, i saw so were many other people.
as many of you know you need a LS400 fan idler pulley and bracket. its quite hard to fin them unless you can find a completely trashed junk motor. you can buy the bracket but the pulley is the hard part to find.
I found that Lexus of South Atlanta has a great parts section on their site and they have the pulley for a great price (i was expecting at least $200 as that's what Sewell quoted me for the hydraulic pulley). SO, you can buy the pulley on their site for $50 (70 shipped for me) and then get a bracket on Ebay for around 50-60.
Just thought I'd post this up since as I was searching the market place for the pulley and bracket combo, i saw so were many other people.
02-20-13, 05:57 PM
#5
My next purchase for my car will be headers, but after that the conversion will begin.
Ill post pics and make a how to for you guys!
04-29-13, 04:33 AM
#7
Driver
I found that Lexus of South Atlanta has a great parts section on their site and they have the pulley for a great price (i was expecting at least $200 as that's what Sewell quoted me for the hydraulic pulley). SO, you can buy the pulley on their site for $50 (70 shipped for me) and then get a bracket on Ebay for around 50-60.
.
.
Thank you in advance,
/mike
Trending Topics
04-30-13, 06:15 AM
#8
Driver School Candidate
Join Date: Mar 2013
Location: NM
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
04-30-13, 07:40 AM
#9
Driver
I got word from him that it's coming tomorrow.
Thx anyway
/Mike
Thread
Thread Starter
Forum
Replies
Last Post
