Installing Breather
#1
Driver School Candidate
Thread Starter
Join Date: Aug 2002
Location: tx
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
Installing Breather
Hi,
I have a 93 SC300. I tried to replace the stock rubber intake pipe with the polished aluminum intake pipe. I also tried to install a breather.
From the valve cover, there are TWO hose connected to the stock rubber intake pipe (one big and one small). Do I need to install 2 breathers, or I can just use one breather on the big hole and close/cap the small hole?
Thanks.
I have a 93 SC300. I tried to replace the stock rubber intake pipe with the polished aluminum intake pipe. I also tried to install a breather.
From the valve cover, there are TWO hose connected to the stock rubber intake pipe (one big and one small). Do I need to install 2 breathers, or I can just use one breather on the big hole and close/cap the small hole?
Thanks.
#2
Pole Position
try it once and see if your engine runs. im just saying that cuz tried 2 breathers on my 90 ls and my car wouldnt start, 2mts. later i thought hmm maybe if i cap the one for the manifold, and put one on the pvc. and sure enough it worked im excited just knowing for one i figured it out, and 2 my engine is happier
or try a search
good luck
or try a search
good luck
Thread
Thread Starter
Forum
Replies
Last Post
toystry
RC F (2015-present)
33
11-24-15 07:08 PM