jmorando05

iTrader: (2)

What a pita pulling the motor was but was first time doing a Lexus.. Pics to come later today, already sold motor but should have auto trans, ecu full harness, stock exhaust parts, intake manis, and fuel stuff up shortly once I snap pics.

soarer13oy

iTrader: (13)

Take lots of pics! GL with the build

TweakTech

iTrader: (2)

What swap are you doing?

jmorando05

iTrader: (2)

more then likely the 1jzgte as ive been finding quite a bit more around then 2j's

started cleaning up the bay a little but going to need a lot more scrubbing here some before and after pics just did a quick spray and rinse

1JZPWRD

iTrader: (59)

This looks so familiar... GL on your swap... Takes lots and lots of pictures. :-)

jmorando05

iTrader: (2)

yea going to try and bribe the gf to sit outside and click away as im working once I really start getting into it. Im kinda stuck on what I want to do paint wise. Ive always been in love with blues and black but the sandstone has grown on me slightly and definitely be the cheapest route just getting it refreshed. any opinions?

TweakTech

iTrader: (2)

You're an intense individual I see....you pulled the harness off the engine to pull the engine....I hope you don't go about the rest of your swap the hard way.

jmorando05

iTrader: (2)

Harness was coming off anyways and started by taking that off before I got to pulling it. Plus sold the motor without so didn't matter much

kez

iTrader: (4)

Clean that bay with power washer, wrap up all wires and hoses

jmorando05

iTrader: (2)

Bays stripped and going for paint this week not 100% sure on color either a deep blue or black