98 sc300 2jzgte swap(aristo) NEED HELP
#1
Driver School Candidate
Thread Starter
Join Date: Apr 2012
Location: ca
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
98 sc300 2jzgte swap(aristo) NEED HELP
I have searched and searched with no help...i currently have a 98 sc300 and i have a full aristo swap i purchased from a friend that came out of a 93 sc300 , i thought everything would be plug in play...but the AC blower or condensor does not come on...not does it rev past 2000 rpm...my question is that where the engine harness connects to the dash harness in my car the same wiring as the one in a 93 sc300 or does it have to be rewired...and if so what needs to be rewired...thank you in advance
#3
Driver School Candidate
Thread Starter
Join Date: Apr 2012
Location: ca
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
I totally understand that part...but the harness i have is wired for the aristo motor in an 93 sc300...it worked perfect in my friends car...but what i am trying to find out is where the engine harness meets the 98 dash harness, will it plug up with no issues? or does that part need to be rewired not the engine harness to the ecu it self but the plugs that connect to the dash plugs...cause i don't think the dash harness has anything to do with VVTi
Thread
Thread Starter
Forum
Replies
Last Post