sc400 fuel injectors
#1
Lead Lap
Thread Starter
Join Date: Dec 2001
Location: IN
Posts: 515
Likes: 0
Received 0 Likes
on
0 Posts
sc400 fuel injectors
i've been looking into getting new fuel injectors, my sc is mostly stock, i have an intake, greddy mx exhaust, S-AFC, im not sure what there is for the lex, i found a web site that may have something, but not sure on how big/ how many cc to get, anyone have any idea on what to get
#2
Ali,
What do you think if the safc for the sc400?? Does it make any difference. i am think of getting one but I heard it does not work with our computers. However, i don't know why you would want to change the injectors. I think there should be plently of capacity in the stock fuel system.
Raj
What do you think if the safc for the sc400?? Does it make any difference. i am think of getting one but I heard it does not work with our computers. However, i don't know why you would want to change the injectors. I think there should be plently of capacity in the stock fuel system.
Raj
#3
Lead Lap
Thread Starter
Join Date: Dec 2001
Location: IN
Posts: 515
Likes: 0
Received 0 Likes
on
0 Posts
safc
i honestly think it is great, i can tell/feel a defference, i never dynoed the car to set it up, but i plan on it next summer, the car is stored now, i don't want to drive it in the winter, but w/o dynoing the car to tune the super-afc, i played with it a little and i will recomend it for all sc's, i would say get it, it works with the car no prob, some say it only works half the engine, not true, when you set it up, the setup must be ( toyota 4 cylinder cars) but it will work just fine, let me know if you have any other questions, azmh_ott@yahoo.com.
#4
Hello Ali,
I have been searching for injector for my TT LS400 project. I just crashed my computer and lost all the links and info. Anyway, RC Engineering do make a Peak and Hold injector for our can. I was inquiring about the 550cc. I got few emails from RC stating the anything over 370cc, the Apexis piggyback computer would not support.
I think the 550cc is too big for 15 psi, but i hate to upgrade fuel injectors again if i want to run 18-20 psi in the future. There is a place on the web call "speed??" Sells it for $349 for 4 injectors.
I have been searching for injector for my TT LS400 project. I just crashed my computer and lost all the links and info. Anyway, RC Engineering do make a Peak and Hold injector for our can. I was inquiring about the 550cc. I got few emails from RC stating the anything over 370cc, the Apexis piggyback computer would not support.
I think the 550cc is too big for 15 psi, but i hate to upgrade fuel injectors again if i want to run 18-20 psi in the future. There is a place on the web call "speed??" Sells it for $349 for 4 injectors.
Thread
Thread Starter
Forum
Replies
Last Post
g4ebguy90
Performance & Maintenance
5
03-23-12 03:30 PM