No cranking or solenoid noise
08-02-16, 11:36 PM
#1
Driver
Thread Starter
Join Date: Jul 2015
Location: Ca
Posts: 153
Likes: 0
Received 0 Likes
on
0 Posts
No cranking or solenoid noise
92 sc400, I just finished putting a motor into it, tryed starting it and got clicking noise. So I removed the battery and charged it(didnt charge it much) When I go to start it I get dash lights fuel pump and whatnot but no cranking or solenoid noise. I remove the starter relay and replace it with a different one and the starter immediately starts spinning until I remove the relay. ( the key was not in the ignition). Starter is brand new and known to work. Any ideas as to whats going on?
08-05-16, 01:12 PM
#2
Driver
Thread Starter
Join Date: Jul 2015
Location: Ca
Posts: 153
Likes: 0
Received 0 Likes
on
0 Posts
The solution was to wire a button that bypasses the relay and initiates the starter. But upon further investigation it was the ignition switch.
Last edited by Sony1492; 08-17-16 at 10:14 PM.
Thread
Thread Starter
Forum
Replies
Last Post
kiwiboy
GX - 1st Gen (2004-2009)
2
03-06-19 03:41 PM
Studiogeek
Performance & Maintenance
7
11-27-13 11:02 AM