Performance & Maintenance Engine, forced induction, intakes, exhausts, torque converters, transmissions, etc.

Car Won't start or idle unless Brake Applied

Thread Tools
 
Search this Thread
 
Old 12-16-11, 03:24 PM
  #1  
IRRELEVANT
Driver School Candidate
Thread Starter
 
IRRELEVANT's Avatar
 
Join Date: Jul 2011
Location: Texas
Posts: 13
Likes: 0
Received 0 Likes on 0 Posts
Default Car Won't start or idle unless Brake Applied

I have a 1992 Lexus SC400. Had the timing chain, water pump, tensioners, etc. replaced as well as the coils, distributor cap, one of the rotors, wires and plugs replaced as well. Car ran great. Got in it to crank it up and it would crank up and fall dead. I checked the MAF, still nothing. Happened to crank it up and left my foot on the brake and it starts and stays running. As soon as my foot is almost off the brake, it falls dead. I spent all day today screw with trying to get the MAF screws off to replace the MAF with another one. Does anyone have a clue what the hell is going on with this car. This is my first SC400 and from the looks of things, my last. I'm getting frustrated with this car. Let me know, thanks in advance.
Old 12-16-11, 04:51 PM
  #2  
BeansIS
Pole Position
iTrader: (2)
 
BeansIS's Avatar
 
Join Date: Aug 2009
Location: ga
Posts: 338
Likes: 0
Received 3 Likes on 2 Posts
Default

That's very wierd, sounds like it could possibly be a very bad vacuum leak. Maybe when your foot is on the brake the booster vacuum helps somehow? Check all everything possible to make sure something was not left disconnected.
Old 12-16-11, 05:39 PM
  #3  
1JZPWRD
1JZ Single SC400
iTrader: (59)
 
1JZPWRD's Avatar
 
Join Date: Jan 2009
Location: Alabama, Roll Tide!
Posts: 8,518
Likes: 0
Received 15 Likes on 12 Posts
Default

That was my first thought also. Recheck the coils on both sides then recheck the wires on the plugs and make sure they are not pinched by the plastic.
Old 12-17-11, 04:47 AM
  #4  
MstrTech
Driver School Candidate
 
MstrTech's Avatar
 
Join Date: Dec 2011
Location: AZ.
Posts: 17
Likes: 0
Received 0 Likes on 0 Posts
Default

As you describe it, it sounds like the power to the brake light is some how providing power to a critical system, ecu, ignition... Check all the fuses, not just to see if blown but check for power w/ignition on. If this is what it is doing just trace down the short. Hth.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Project4dr
IS - 1st Gen (2001-2005)
0
11-12-16 10:11 AM
cones169
RC F (2015-present)
5
12-08-15 03:36 PM
BradES300
ES - 1st to 4th Gen (1990-2006)
10
06-21-13 09:32 PM
Klaus
SC- 1st Gen (1992-2000)
2
07-09-10 04:16 PM
QwkSC
Performance & Maintenance
10
07-04-09 08:35 PM



Quick Reply: Car Won't start or idle unless Brake Applied



All times are GMT -7. The time now is 10:53 PM.