PoGikoSc4

iTrader: (17)

i need to install my clutch fan ASAP on my 1jz ,never done it before.. What do i need and do to install it and make sure its not gonna pop off on me..i already have the clutch fan and shroud, just arrived today. and i also did my research on here and the web.

thanks a lot..

wirelesstj

iTrader: (1)

does ur 1j already have a clutch fan or are u changing from a hydro pump to clutch fan?

PoGikoSc4

iTrader: (17)

from electric fans to clutch fan..it looks pretty basic but i just wanna make sure if i can use a regular nut bolt and if i need to torque it. pretty much need to know how to do it right.

wirelesstj

iTrader: (1)

pretty simple, just torque it till its tight. no real torque value. its a little irritating to do it with the fan on the clutch but its do-able. good luck! its easy

PoGikoSc4

iTrader: (17)

thank u so much...good day to u..

WadeLovell

iTrader: (5)

Torque should not be less than 16.9 nm and a little blue loc-tite would be an asset.