drastic95

iTrader: (1)

I know I'm gonna catch some slack for starting this thread but I looked for an established one and couldnt find it. I have a 95 stock 2jz with a factory 5 speed tranny. The motor only has 80k on it so I feel a little reluctant yanking a perfectly good low mileage motor to do the swap. I heard the E-Bay turbo kits are garbage, is there any decent kit for around 1000-1500? I'm llooking for at least 300 hp....any suggestions?

VanillaSC

http://store.driftmotion.com/static/...-1turbokit.php

maynanator

iTrader: (1)

this kit requires a tune and charge piping, fmic, and a bov.

MikeNguyen

upgrade day by day. NA-t? I would do GTE intake manifold, and turbo headers

lookEVO

iTrader: (1)

xs-power kit is decent for the price if you are looking to go budget. 1590 shipped. check out clubna-t.com

drastic95

iTrader: (1)

Thanks for the input.

F4A22

iTrader: (14)

Ebay cast manifold
Genuine Garret 61mm or bigger non bb(for price)
Name brand oil feed,return lines and fittings.
38mm to vband adapter
Tial 44mm wastegate
Tial blow off valve
Ebay intercooler and piping kit
Map ecu
Jdm 440 injectors

That should put you under $1500 new or alot cheaper used and be alot better off than any ebay kit out there.The cheap tubular manifolds need bracing and cutting corners always costs more in the longrun.The turbo setup on my car is similar to above except its a smaller turbo and a GTE engine.

drastic95

iTrader: (1)

F4A22, I noticed your in FL, Would'nt happen to be SOFL would it? I'd like to take my car to someone thats familiar doing these setups.

F4A22

iTrader: (14)

Sorry i'm in Bartow which is almost in the middle of the state.Theres quite a few turboed sc's down there i'm sure you can find help easily.If you need guidance or a souce for parts pm me.

DuWerke

iTrader: (3)

Does this manifold clear the dizzy?

SChema

iTrader: (2)

In order to do GTE intake and exhaust manifolds, you would need to do a GTE head as well.