YeA 2jZ

iTrader: (15)

So looking around at trans ideas and seeing the price go up and down on 6-speed's. I came accross this on egay..

http://cgi.ebay.com/ebaymotors/Custo...-/200486491705

what else is required to the Tremec to work behind a JZ series engine ? Flywheel ? This really peaks my interest since I seen Tremec's in my area for pretty cheap

http://www.toymods.org.au/forums/showthread.php?t=57022

97-SC300

iTrader: (17)

Good question!!!! In for an answer also

LeeSC300

iTrader: (1)

that is just a CAD file though... so you'd have to machine it yourself.

BenStoked

iTrader: (3)

saw the same thing for the 1uz and was also curious.

YeA 2jZ

iTrader: (15)

yea I understand its a CAD file thats not the question. The question is once you have the adapter plate what else would be required to get it to work. Custom flywheel, clutch setup ? obviously the driveshaft would need to be custom but anything else clutch lines ?

Ali SC3

iTrader: (10)

theres a thread that they link to that covers mating an adapter for the 1uz for the auto bellhousing to an R154 trans listing all the various parts. you could probably work out a mix and match flywheel/clutch setup from the 2 cars. I'm guessing the driveshaft is probably the most custom part.

ClearP

Tremec T56 can be had for 2000 or less, a bargin compared to 3500 getrag! I'll look into this!

Carfreak70

iTrader: (16)

I'm going to subscribe to this thread. If someone gets some good info and actually does the swap, I would be very interested in doing this myself. Someone needs to get the file and just mass produce it. Make more money than selling a stupid file.....kind of a dumb to sell a file many people can send to others-for free.

shern

iTrader: (6)

I'm subscribed with enthusiasm. T56 transmissions can be purchased for small money.

One thing to note as I've been researching LSx swaps; there are different shifter locations for different flavors of T56 transmissions out there as you can see below just like our W58/R154s!

T4-Teg

iTrader: (2)

Not a bad idea seeing as the new Getrags at Toyota are $15k+ now..

BLK13X

There's a couple of T56 shifted Soarers here in Oz that I've heard of, from what I remember they're all V8's.

ClearP

it's back down to 5600 now.

Slade

iTrader: (5)

Getrags are almost bulletproof. I would aim for that as it is almost just bolt in.

YeA 2jZ

iTrader: (15)

Where does a Soarer R154 measure in, compared to the pic ?



Guys please lets not make this a Tremec vs. Getrag thread. This is simply looking for info on doing a Tremec swap into the SC, since it sounds like the Australians are already doing it

Agent0024

iTrader: (4)

In for more info. This is very interesting.