Performance & Maintenance Engine, forced induction, intakes, exhausts, torque converters, transmissions, etc.

beaten by a 1uz

Thread Tools
 
Search this Thread
 
Old 10-15-10, 04:11 PM
  #1  
taka21
Driver School Candidate
Thread Starter
 
taka21's Avatar
 
Join Date: May 2010
Location: DC
Posts: 10
Likes: 0
Received 0 Likes on 0 Posts
Default beaten by a 1uz

i think ive tried everything folks and to no avail
my summer project is still kicking my butt
i have replaced cats, ecu's, maf's and vacum hoses
and i still have the same issue of the damn thing will not rev past 4k and is kicking black smoke from running extremely rich, i just have a few final questions before i totally give up , as this project has me to the point where i am doubting myself and what little mechanical skill i thought i had gained.
1 can the idle air control valve be completely removed without harming functionality of the motor?
2 if the fuel return line is too large would that cause a rich condition in the engine
3 what would cause the maf and iacv to not communicate with the ecu?
im officially stumped with this project daily driver please anyone, i really need a direction to go in
thanks
Old 10-15-10, 05:02 PM
  #2  
evileagle
Lexus Test Driver
 
evileagle's Avatar
 
Join Date: Aug 2007
Location: Ca
Posts: 927
Likes: 0
Received 3 Likes on 3 Posts
Default

what year is your SC..
Old 10-15-10, 05:04 PM
  #3  
LiCelsior
Retired

iTrader: (32)
 
LiCelsior's Avatar
 
Join Date: May 2007
Location: NY
Posts: 12,362
Received 17 Likes on 15 Posts
Default

running rich, i could think of ignition coils going bad, o2s are bad. timing probably may be off.
Old 10-15-10, 05:13 PM
  #4  
taka21
Driver School Candidate
Thread Starter
 
taka21's Avatar
 
Join Date: May 2010
Location: DC
Posts: 10
Likes: 0
Received 0 Likes on 0 Posts
Default

the motor is from a 97 sc400 and its obd2
also its throwing the mass air sensor wiring code
Old 10-15-10, 06:27 PM
  #5  
masagsxr
Lexus Test Driver
 
masagsxr's Avatar
 
Join Date: Aug 2009
Location: CA
Posts: 1,520
Likes: 0
Received 1 Like on 1 Post
Default

Thats probably the problem you have there which is why its not revving pass 4K...

+1 on the timing.
Old 10-15-10, 07:04 PM
  #6  
hershsc400
Pole Position
 
hershsc400's Avatar
 
Join Date: Dec 2006
Location: tx
Posts: 273
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by taka21
the motor is from a 97 sc400 and its obd2
also its throwing the mass air sensor wiring code
I see you say the motor is from the97 sc400, is that your car or is your car a different year?
Old 10-15-10, 07:11 PM
  #7  
taka21
Driver School Candidate
Thread Starter
 
taka21's Avatar
 
Join Date: May 2010
Location: DC
Posts: 10
Likes: 0
Received 0 Likes on 0 Posts
Default

different car alltogether the motor is in an 87 supra but the motor ecu and wiring harness all came out of the same 97 sc400
to my knowledge the wiring issue that the the code is describing is one in the factory wiring harness that i havent touched
Old 10-15-10, 07:36 PM
  #8  
attzor
Lead Lap
iTrader: (1)
 
attzor's Avatar
 
Join Date: Jan 2009
Location: Cumming, Georgia
Posts: 599
Likes: 0
Received 0 Likes on 0 Posts
Default

sounds like it could be ignition coils, change them both and see, their cheap and cause that sort of issue.
Old 10-16-10, 01:33 PM
  #9  
taka21
Driver School Candidate
Thread Starter
 
taka21's Avatar
 
Join Date: May 2010
Location: DC
Posts: 10
Likes: 0
Received 0 Likes on 0 Posts
Default

hey heres a link to the video i just made showing whats going on with the car
http://www.youtube.com/watch?v=WjRpHaA64sY
Old 10-17-10, 03:26 PM
  #10  
LiCelsior
Retired

iTrader: (32)
 
LiCelsior's Avatar
 
Join Date: May 2007
Location: NY
Posts: 12,362
Received 17 Likes on 15 Posts
Default

damn that sounds like crap lol. sounds like ur gonna need to replace that PS pump soon also lol.

sounds fine idling, but i do think ur timing might be off. remove the cam covers and check the notches.
Old 10-17-10, 11:20 PM
  #11  
vegas_sc4
Driver
iTrader: (1)
 
vegas_sc4's Avatar
 
Join Date: Oct 2009
Location: Nevada
Posts: 114
Likes: 0
Received 0 Likes on 0 Posts
Default

Prolly have the wrong air flow meter. My buddies s14 did the same thing. Try changing the maf
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
dicer
LS - 1st and 2nd Gen (1990-2000)
9
07-18-17 09:52 AM
Porter92
Performance & Maintenance
12
08-28-13 01:22 PM
drfade27
Performance & Maintenance
8
03-26-13 12:41 PM
Calyko22
LS - 1st and 2nd Gen (1990-2000)
15
06-30-09 09:31 AM
JAB
RX - 1st Gen (1999-2003)
4
07-31-06 11:08 AM



Quick Reply: beaten by a 1uz



All times are GMT -7. The time now is 08:29 PM.