Performance & Maintenance Engine, forced induction, intakes, exhausts, torque converters, transmissions, etc.

Need help sc400 ignition issues......

Thread Tools
 
Search this Thread
 
Old 09-14-10, 05:13 PM
  #1  
armyman244
Driver School Candidate
Thread Starter
 
armyman244's Avatar
 
Join Date: Feb 2010
Location: S.Carolin
Posts: 29
Likes: 0
Received 0 Likes on 0 Posts
Default Need help sc400 ignition issues......

Ok. This is pretty funny and weird to me. After a tune up (cap's, rotor buttons, coils, wires, and plugs. I did the driver side and everything was great. I did the passenger side and it runs like crap. I pulled all the plugs all the plugs on the driver side and all looked good. Pulled them from the passenger side and all were soaked in gas. Ive checked the firing order 10x. It doesnt make sense b/c you distrubitor fires 2 plugs on each side. But one hole side of the motor isnt firing. Both Coils are sparking (I got lite up on both of them. Ive checked spark at all the plug wires and they have spark... im at my whits end. Does any body have any suggestions????
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
cgawelko
LS - 1st and 2nd Gen (1990-2000)
13
04-23-15 05:51 PM
2GSTony
GS - 2nd Gen (1998-2005)
4
12-12-14 11:46 AM
Handsome
Performance & Maintenance
1
11-04-14 02:21 PM
kohatsu
LS - 1st and 2nd Gen (1990-2000)
17
04-29-14 11:48 AM
dry-fly
LS - 3rd Gen (2001-2006)
16
09-29-11 06:10 PM



Quick Reply: Need help sc400 ignition issues......



All times are GMT -7. The time now is 06:13 PM.