Solid answer on Q45 TB on GTE ECU...
#1
Solid answer on Q45 TB on GTE ECU...
Ok starting to finish up my na-t finally, and need a 90mm TB without cutting off my arm. I have been searching and reading usless threads for 2 days now, and cannot find a solid answer regarding the Q45 TPS. As some may know, I will be running my NA-T on a GTE ecu, but would like to know if the GTE ecu is able to PROPERLY recognize the Q45 TPS, and I also need a wire diagram.
I know there is an adapter available, but my current budget is limited due to starting a completely different part of my SC's build, but until that time (after the new year) I need my SC on the road. SO, if there is anyway possible to run the Q45 TPS on the GTE ecu please let me know. All I have found in my search so far is a bunch of yes's and no's, but no SOLID answer.
I know there is an adapter available, but my current budget is limited due to starting a completely different part of my SC's build, but until that time (after the new year) I need my SC on the road. SO, if there is anyway possible to run the Q45 TPS on the GTE ecu please let me know. All I have found in my search so far is a bunch of yes's and no's, but no SOLID answer.
#4
Lexus Champion
iTrader: (10)
for a mk3, but Its similar: http://www.supraforums.com/forum/sho...d.php?t=321855
and this one for an n/a: http://www.supraforums.com/forum/sho...d.php?t=417180
and this one for an n/a: http://www.supraforums.com/forum/sho...d.php?t=417180
Last edited by Ali SC3; 08-18-10 at 08:49 AM.
#5
for a mk3, but Its similar: http://www.supraforums.com/forum/sho...d.php?t=321855
and this one for an n/a: http://www.supraforums.com/forum/sho...d.php?t=417180
and this one for an n/a: http://www.supraforums.com/forum/sho...d.php?t=417180
#8
Lexus Test Driver
iTrader: (33)
Join Date: Jul 2004
Location: Sideways on the Yellow Brick Road! < Thats KS!
Posts: 5,827
Likes: 0
Received 4 Likes
on
4 Posts
Just a FYI, the Q45 TB is not really a 90mm, I dont know who started this whole 90mm thing but its all over the internet. The OD measures 90mm, the ID, which is what matters measures 85mm. Its still a nice upgrade and the TPS will work from what I understand. I happen to have one setting around as well.
#9
Just a FYI, the Q45 TB is not really a 90mm, I dont know who started this whole 90mm thing but its all over the internet. The OD measures 90mm, the ID, which is what matters measures 85mm. Its still a nice upgrade and the TPS will work from what I understand. I happen to have one setting around as well.
#10
Lead Lap
Join Date: Jan 2006
Location: Ronert Park, CA
Posts: 735
Likes: 0
Received 0 Likes
on
0 Posts
when i put my q45 TB on my intake manifold, i just used the greddy TPS adapter, so that way i could just use the stock TPS, use thread lock because the little allens will back out
#12
Lexus Test Driver
iTrader: (1)
Join Date: Aug 2001
Location: New York
Posts: 1,529
Likes: 0
Received 0 Likes
on
0 Posts
Just a FYI, the Q45 TB is not really a 90mm, I dont know who started this whole 90mm thing but its all over the internet. The OD measures 90mm, the ID, which is what matters measures 85mm. Its still a nice upgrade and the TPS will work from what I understand. I happen to have one setting around as well.
#13
I'm going to order the adapter tomorrow just to skip the haggle, plus my SC hasnt seen pavement in almost 4 months now, and its time to get her back on the road.