MPH Unlimited Headers Released!!!
#1
Driver School Candidate
Thread Starter
Join Date: Dec 2001
Location: Simi valley
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
MPH Unlimited Headers Released!!!
Hello everyone,
A few months ago we posted that we will be making headers for the SC300 and they are finally ready.
We dynoed our headers on a stock car today and we gained 17hp and 11.2 pounds of torque. We had an exhaust leak between our headers and the stock downpipe due to a miss matched flange that will be fixed tomorrow. Even with a leak we managed to gain a fair amount of horsepower. Expect to gain over 20hp to the wheel and over 15 pounds of torque without any sort of leaks.
Al
A few months ago we posted that we will be making headers for the SC300 and they are finally ready.
We dynoed our headers on a stock car today and we gained 17hp and 11.2 pounds of torque. We had an exhaust leak between our headers and the stock downpipe due to a miss matched flange that will be fixed tomorrow. Even with a leak we managed to gain a fair amount of horsepower. Expect to gain over 20hp to the wheel and over 15 pounds of torque without any sort of leaks.
Al
Last edited by Static911; 06-12-02 at 01:45 AM.
#3
Originally posted by lex400sc
Any plans for headers on the SC400?
Any plans for headers on the SC400?
I do recall someone had aftermarket headers for the sc4 but i'm sure it was custom work and not in mass production or anything... wonder how much hp he got from it??
#5
Lexus Fanatic
Curious, would the SC400, GS400, and LS400 headers all be the same? What about the SC300, IS300, and GS300? If they are all compatible, I think it'd be worthwhile for MPH Unlimited to develop a 1UZ-FE header .
#6
Lexus Fanatic
Also, what effect do headers have on the exhaust sound? I remember when my buddy installed headers on his Prelude, there was somewhat of a throaty droning sound at higher rpm.
#7
Driver School Candidate
Thread Starter
Join Date: Dec 2001
Location: Simi valley
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
We will have 2 versions of the headers, one that will fit the SC300 and the 93-97 GS300. The 2nd version will fit the IS300 and 98- up GS300.
We didnt forget the SC400, we just started out with the 300's first.
We will be looking for a GS400, LS400 and an SC400 in order to make headers for those cars and see if we can make one set of headers that will fit all.
Once we will be ready to make them for the 400's we will post on here and see if there is anyone who is willing to volunteer their car for a few days.
The headers for the SC300 will change the exhaust tune, it will be louder and more aggressive sounding, but not annoying. We will provide gaskets and all hardware necessary. At higher RPM's the car sounds solid and has no throaty droning sound, just sound like you have an after market exhaust system on it.
If anyone has any questions please e-mail me at sales@mphunlimited.com or call me at (805)557-1001.
Thanx. AL
We didnt forget the SC400, we just started out with the 300's first.
We will be looking for a GS400, LS400 and an SC400 in order to make headers for those cars and see if we can make one set of headers that will fit all.
Once we will be ready to make them for the 400's we will post on here and see if there is anyone who is willing to volunteer their car for a few days.
The headers for the SC300 will change the exhaust tune, it will be louder and more aggressive sounding, but not annoying. We will provide gaskets and all hardware necessary. At higher RPM's the car sounds solid and has no throaty droning sound, just sound like you have an after market exhaust system on it.
If anyone has any questions please e-mail me at sales@mphunlimited.com or call me at (805)557-1001.
Thanx. AL
Trending Topics
#9
Driver School Candidate
Join Date: Dec 2001
Location: Sydney Australia
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
Headers for the sc400
Were have you guys been?
Please check the thread under the heading of HEADERS!
They are ready to go and will be at your door in 10 - 12 days
All pricing and delivery details are on that thread and also all tech info.
We are a few days away from completing the LS400 headers
They are very different, engine mounts, firewall, etc,
So have a look there are about 74 posts already, and some guys have ordered and some have received...
Tex
Please check the thread under the heading of HEADERS!
They are ready to go and will be at your door in 10 - 12 days
All pricing and delivery details are on that thread and also all tech info.
We are a few days away from completing the LS400 headers
They are very different, engine mounts, firewall, etc,
So have a look there are about 74 posts already, and some guys have ordered and some have received...
Tex
#10
Bluegr*** Performance
Join Date: Feb 2002
Location: North Kentuckarolinay
Posts: 1,532
Likes: 0
Received 0 Likes
on
0 Posts
Al,
A few of us SC300 guys are interested in a quality log style cast manifold for turbo application. Something that will bolt to the 2JZ head and accept say a t60-1 turbo. Are there any plans from your company to develope something like this. I would be willing to invest 1,000$. I don't know about the others, but I'm sure there are a few whom are looking for options. Let us know what you/MPH unlimited think.
Thanks,
AJ
A few of us SC300 guys are interested in a quality log style cast manifold for turbo application. Something that will bolt to the 2JZ head and accept say a t60-1 turbo. Are there any plans from your company to develope something like this. I would be willing to invest 1,000$. I don't know about the others, but I'm sure there are a few whom are looking for options. Let us know what you/MPH unlimited think.
Thanks,
AJ
#11
Search Function Inc.
tex! Are you serious man? LS finally? You are my hero!
are you guys thinking about making a throttlt body for our cars? Slow tranny is really a problem for our cars.
are you guys thinking about making a throttlt body for our cars? Slow tranny is really a problem for our cars.
Thread
Thread Starter
Forum
Replies
Last Post