Guest

A local guy from sf forums is selling his 1jz here's the specs.

1jz engine with all new seals and gaskets from toyota including front and rear main seals, intake and exhaust, cam seals, head gasket, and valve cover gaskets.it has arp head bolts that have already been re-toruqued at 90. it has 2jz cams installed as well as mkiv 550 injectors. the wiring harness is already extended with new connector going to he coil pack as well as knock sensors. this setup will include all sensors as well as 2jz map sensor and ignitor.

note that the harness is made for 89-92 supras.

he took me for a ride in his car and it pulls pretty hard with his masterpower turbo on it and everything seem to work and sounded perfect

He told me he wants 1600 for the complete engine and turbo manifold.


"turbo is not included everything but that he will be using it in a 2jz swap"

1siksc

iTrader: (8)

dang, thats cheap

zhillz

No no to reusing head bolts.

Pspice

thats cheap and it has camshafts?

ishootstuf

iTrader: (1)

They're ARP head bolts, not TTY bolts. As long as they have not been overtorqued, they can be reused.

CP_Ree

iTrader: (1)

It's worth about $50. Keep your 2jz and just replace the HG you blew! haha

Guest

To late started selling parts already.

turbodremz

iTrader: (18)

thats not bad..how much is going to be to get the harness swapped over for your SC though?

Guest

the harness is already extended for a mk3 so i think it should reach and he said if i pay him 150 he will do the re-pin conversion to fit the sc300 or somthing like that.

joeazy187

iTrader: (1)

if he knows what he is doing then it sounds like a good deal but be sure he knows what he is talking about and not just making it seem easier than it is gl

turbodremz

iTrader: (18)

not bad at all, sounds like you found a deal.

soarer13oy

iTrader: (13)

i pretty good deal

Cleanshots

iTrader: (2)

not worth it you said the head needs work and valves are ticking. stop looking for things i even came and helped you that day. comon kevin!

Guest

he told me it needed a valve or cam job lol i forget what it was but it was because the 2jzcams so i think i was meaning to say cam job either way i dont know what they mean but when i looked at the engine it was not even ticking or at lease not any ticking i could notice i don't mind it at all it seem normal and healthy.

wanganstyl

iTrader: (5)

honestly, if you are in norcal you could just buy my 2jzgte complete, no problems with it.