sc3757

iTrader: (2)

Ok first off i drive a 93' Sc300 5spd. Here the prob: so i go to drive my car home last week during the morning. The car sat all day. When i go to drive it in the afternoon the car starts to crank then its like it lets go. It tries to start then makes a "whooo" noise like a whining. So i get the drift that its time for a rebuild. So i get a rebuild kit. I replace the contacts, and the solenoid. I reinstall the starter and its doing the exact same thing. I don't think its the flywheel cause it just ran fine and started fine that morning. It'll push start and run fine. any suggestions would be greatly appreciated, THANKS in advance.

Papajorgio

iTrader: (7)

this might help, http://www.ifitjams.com/starting.htm ,if not good luck with your problem mang...

oh and you can click on the diamond shaped boxes in the chart for more info...

Ali SC3

iTrader: (10)

you try giving it a small tap on the side yet??? the whining noise is probably your fuel pump

sc3757

iTrader: (2)

nah it not the fuel pump whine, the starter catches and lets go and if i keep holding the key it whines. its not a fuel pump whine.

sc3757

iTrader: (2)

when i follow it takes me to the the solenoid or either the flywheel missing teeth, but it ran fine earlier that day and i dont beat on my car or anything so i dont see why it would bend out of nowhere, Thanks for the chart though.

sc3757

iTrader: (2)

lmao and why does the title change if i said fuggin?