lex400sc

How much is this kit? Has anyone investigated? With turbo it dynoed 276rwhps and 319rwtq at 6.5psi. That's a gain of 97 wheel horses and 126 wheel torque. This is a good enough a starting point to build upon. Imagine the gains on 12psi!

DriftGirl

iTrader: (6)

I think it was a '1-off' that he $pent big time for.:eek:

Also,Marcus said that the guy lived not too far from us here in WA state.

So I'll try to find out more from him later today.

~Em

lex400sc

Thanks Em

Lex Luthor

The owner of the shop is Jim McFarland, he's a nice guy and knows his *****. The TT setup isn't a one-off, he's done it a few times, but it's not avail in a kit either. We're talking 15 grand here folks.
- Jon

lex400sc

Ouch! 15 grand for 97rwhps, too rich for my blood...

the_ez_rhino

From what Ive heard/read, the mechtech project was a joke. I have also heard that it cost 15000 to create. 15G's for 100 rwhp. For that you could buy a beater 300 AND turbo it, while still keeping your 400

SCV8

...Or a 32valve ZR1 corvette swap.
Any details on what kind of components were used;turbos;intercooler;stock timing;additional injectors;fuel pump;etc.?
Would be good pivot info for the guys who're armchair-wrenching their turbo install.

Bean

iTrader: (1)

doesn't matter, whatever it was, its worthless

97rwhp for $15k? my god; i'd shoot myself... i wouldn't even contemplate on using any parts from that kit... a turbo kit ISN'T that complicated... if someone spent that much money on a turbo kit and only made that kind of power, in the size of the motor we're talking about... seriously, he's a moron and couldn't tune something to save his life

come on, a nitrous kit can make more power than that and it'll cost $600

Keith13b

iTrader: (3)

Amen to that!

VSsc400

iTrader: (1)

i spoke with the guys at M-tech. Actually it was series of emails. I asked him how much it would cost. He replied and told me $17K. I told him that he had given quotes for $15K for other people and why it was $17K for me. He didn't reply to me after that. Oh well. I actually spoke to people at custom turbo shops and I was told I should be looking at no more than $12K for a twin turbo setup. just my 3 cents... its 2 cent for everyone else

Bean

iTrader: (1)

try no more than $6k

VSsc400

iTrader: (1)

6K? really? can you give me a contact number?

Lex Luthor

Got a guy for $6000, but he's on the opposite coast from us Dennis. Bean, who's your guy?

lex400sc

That would put him on the West Coast . Lex, $6000 installed??? What kind of power are we talking?

VSsc400

iTrader: (1)

Luthor we can do a group turbo install. If we get like 3 guys to do it its going to be totally worth it for them. I'll go to the west of if they can send the kit.... the 6K price is installed?