soarer13oy

iTrader: (13)

Is this enough piping for a fmic??



PACKAGE INCLUDE:
2 x 11" straight aluminum pipe
2 x 13" 90 degrees aluminum pipe
4 x 15" 45 degrees aluminum pipe
6 x straight blue 3" coupler
2 x 90 degrees elbow blue coupler
16 x steel clamps

Guest

i just ordered the same one but with the extra U pipe... i hope it's all i need

turbodremz

iTrader: (18)

be sure to get those pipes welded or bead rolled..other than that it seems like it would be sufficient.

SH_JZZ30

iTrader: (1)

Yes that's more than enough. Make sure you get them bead rolled and buy tbolt clamps. And get silicone couplers. At least 4ply. Those are rubber couplers which suck. I had one pop a hole on me. So all you should use is the piping. You will have to make a hole behind your passenger side headlight.

SC300_704

iTrader: (5)

i got pretty much the same thing except mines 2.5" pipings and my couplers looks stiffer than the ones in the pics. still waiting to be installed once i finish buying everything i need.

soarer13oy

iTrader: (13)

The hole behind the headlights, would i have to relocate my battery? Im also looking at this kit.



Straight Aluminum Pipe x2
45 Degree Aluminum Pipe x2
75 Degree Aluminum Pipe x2
90 Degree Aluminum Pipe x2
U Aluminum Pipe x1
Straight Silicon Hose x6
90 degree Hose x2
Stainless Steel T-Clamp x16
This kit has 9 pcs of Pipes, Compare to Most others offered, we have one Extra U pipe.

Great for Many Turbo Intercooler Applications
2mm Thickness, 18" Long/Each


The pipng will go on this hks intercooler:

Guest

that's the one i ordered ^ 3 inch also i relocated my batt so i can cut a hole and run a pipe thought it

soarer13oy

iTrader: (13)

Is it possible to not run that hole? Cant i just run down from the gte tb?

SH_JZZ30

iTrader: (1)

Yes you can. That's how I have mine. I only have a hole behind the headlight for the hotpipe. Make sure your coldpipe sits high enough if you're low.

TURBO819

iTrader: (5)

I did not want to make any cuts so I ran mine like this.

TURBO819

iTrader: (5)

Some more pictures of FMIC with 2.5" piping & 3" off the throttle body. I still need to bread roll three pipes

soarer13oy

iTrader: (13)

thanks for your pics. thats exactly how i want to run my hot pipe.