More Problems!
#1
More Problems!
1. My key wont come out. The only way it will come out is if the battery is pulled.
Can anyone help?
2. 1JZ Swap wont start 92 SC300 Auto. :happysad:
Its cranks but will not turn over.
Fresh Fluids
Fresh Plugs
Checked...
Body/Electrical Plugs
Alt.
FuseBox
Starter
Ignitor
Gas in the car...:ugh2Although the car has had no gas since the last motor was pulled. I put in maybe 2.5 gal.)
12v Mod
Can anyone help?
2. 1JZ Swap wont start 92 SC300 Auto. :happysad:
Its cranks but will not turn over.
Fresh Fluids
Fresh Plugs
Checked...
Body/Electrical Plugs
Alt.
FuseBox
Starter
Ignitor
Gas in the car...:ugh2Although the car has had no gas since the last motor was pulled. I put in maybe 2.5 gal.)
12v Mod
Last edited by SC2JZ300; 11-07-09 at 10:03 AM.
#4
Pole Position
iTrader: (2)
Join Date: Jul 2009
Location: MN
Posts: 216
Likes: 0
Received 0 Likes
on
0 Posts
Did you just finish the swap?
What do you mean "Its cranks but will not turn over."
If you turn the key to start and hear nothing, it's not cranking nor turning.
You may not have the Neutral safty wire hooked up. The wire affect in P and N.
Check IJ2 pin 10 (black/white wire) and hook directly to body ground and turn key again to start. If it starts, be caution because it will start in any gear.
If it starts now and you want to be safe. Re-wire time. Check P1 (from tranny) connectors.
P1 pin 2 (Black wire) to EB1 pin 3.
P1 pin 3 (Black/White wire) to IJ1 pin 6.
If it doesn't start with grounded IJ2 pin 10. Check your starter wire that lead back to connector EB2 pin 1 (Big Black wire)
What do you mean "Its cranks but will not turn over."
If you turn the key to start and hear nothing, it's not cranking nor turning.
You may not have the Neutral safty wire hooked up. The wire affect in P and N.
Check IJ2 pin 10 (black/white wire) and hook directly to body ground and turn key again to start. If it starts, be caution because it will start in any gear.
If it starts now and you want to be safe. Re-wire time. Check P1 (from tranny) connectors.
P1 pin 2 (Black wire) to EB1 pin 3.
P1 pin 3 (Black/White wire) to IJ1 pin 6.
If it doesn't start with grounded IJ2 pin 10. Check your starter wire that lead back to connector EB2 pin 1 (Big Black wire)
1. My key wont come out. The only way it will come out is if the battery is pulled.
Can anyone help?
2. 1JZ Swap wont start 92 SC300 Auto. :happysad:
Its cranks but will not turn over.
Fresh Fluids
Fresh Plugs
Checked...
Body/Electrical Plugs
Alt.
FuseBox
Starter
Ignitor
Gas in the car...:ugh2Although the car has had no gas since the last motor was pulled. I put in maybe 2.5 gal.)
12v Mod
Can anyone help?
2. 1JZ Swap wont start 92 SC300 Auto. :happysad:
Its cranks but will not turn over.
Fresh Fluids
Fresh Plugs
Checked...
Body/Electrical Plugs
Alt.
FuseBox
Starter
Ignitor
Gas in the car...:ugh2Although the car has had no gas since the last motor was pulled. I put in maybe 2.5 gal.)
12v Mod
Trending Topics
#8
Driver School Candidate
iTrader: (2)
Join Date: Sep 2009
Location: CA
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
do you have an alarm system with an auto start? my sc300 had an issue one time, it cranks but does noet turn over, turned out my alarm was acting up... i took out the fuse for the alarm system and it started with no problems... since then i never used my auto start feature...
Thread
Thread Starter
Forum
Replies
Last Post
emoFTW
Performance & Maintenance
3
12-05-12 05:51 PM
SweetGS300
GS - 2nd Gen (1998-2005)
6
09-21-07 11:26 PM