Electrical Wiring Issues w/ Pics
#1
Electrical Wiring Issues w/ Pics
I have a few plugs that aren't matching up. I need to know which wires will go to what....
The body plug -
The Engine Harness -
Also, this is the alternator harness... It has been extended into the cabin where the engine harness meets the ECU.... Which wires do these go to?
The body plug -
The Engine Harness -
Also, this is the alternator harness... It has been extended into the cabin where the engine harness meets the ECU.... Which wires do these go to?
#6
[U]Found some new info on wiring up the alt. This can be used for future reference, and for other people.
1JZ alternator:
White (S)
Yellow/Green (L)
Black/Red (IG)
1JZ Auto ECU Pinout
http://jzs13.se/wp-content/JZZ30_1JZ...ECU_PINOUT.pdf
Found the other answer to my question also.
The TT plug consists of 4 wires. The NA plug only consists of 3.
Pretty much str8 forward...
Red/Black - Red/Black
Black - Black
Any Blue - White
Other Blue - Nothing
Your TT harness may come with a 5th wire. It should be an extra smaller gauge wire(Black/Red). This wire should be soldered into the thicker gauge wire also black and red.
http://www.mkivsoopra.com/project/
1JZ alternator:
White (S)
Yellow/Green (L)
Black/Red (IG)
1JZ Auto ECU Pinout
http://jzs13.se/wp-content/JZZ30_1JZ...ECU_PINOUT.pdf
Found the other answer to my question also.
The TT plug consists of 4 wires. The NA plug only consists of 3.
Pretty much str8 forward...
Red/Black - Red/Black
Black - Black
Any Blue - White
Other Blue - Nothing
Your TT harness may come with a 5th wire. It should be an extra smaller gauge wire(Black/Red). This wire should be soldered into the thicker gauge wire also black and red.
http://www.mkivsoopra.com/project/
Last edited by SC2JZ300; 11-07-09 at 12:54 AM.
#7
Pole Position
iTrader: (2)
Join Date: Jul 2009
Location: MN
Posts: 216
Likes: 0
Received 0 Likes
on
0 Posts
Is this from a sc300 or 400? the second and thrid plug does not look familiar. The 3 wire plug is the EB2.
Black (EB2 pin 1)--To Starter. Engage wire.
White (EB2 pin 2)--To Alternator.
Black/Red (EB2 pin 3)--power to injectors, IACV, VSV, heat o2, and FP ecu. This wire is power from Main relay.
Post more pictures of the other 2 plugs, I can't identify it by the side.
Black (EB2 pin 1)--To Starter. Engage wire.
White (EB2 pin 2)--To Alternator.
Black/Red (EB2 pin 3)--power to injectors, IACV, VSV, heat o2, and FP ecu. This wire is power from Main relay.
Post more pictures of the other 2 plugs, I can't identify it by the side.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
Golden95SC
Performance & Maintenance
1
08-24-14 12:22 PM
Matt300ZXT
Performance & Maintenance
4
07-31-14 07:50 AM