SC400 2jz swap "with pics - Page 2

TroySC300 · 09-09-09, 04:01 PM

Sweeeet. I'm jealous

TuanOhio · 09-09-09, 04:10 PM

auto or 6speed?

StupidSlow · 09-09-09, 04:13 PM

boost logic auto for now 3800 stall but i plan on going 6spd in early 2010 and using the built auto on my IS300 2jzswap.

StupidSlow · 09-13-09, 01:32 AM

i have my 1uz harness and usdm auto 2jz harness im just trying to figure out the best method of doing this basically last step to be done besides mounting the exhaust any info would be helpful...

ninja edit @ 3:00AM lol..... some pdate pics before i turn in i may have the wiring issue down and if so ill make sure ot post exact pinout and wires that are needed for the swap and the body harness :-)

Almost there, oh on a side note ended up not using the clutch fan instead went with a BMW M3 electric fan ill let ya know how it works out, also test fitted my 4" intake all is well ;-)

wiring fun, all labeled and ready for install.

GRN MNSTR · 09-13-09, 08:30 AM

this is so awesome...cuz I thought about going 2j with my 400 since I got the VVTI motor that basically has no aftermarket lol.

Let us know when she cranks up

StupidSlow · 09-14-09, 06:44 PM

thanks man i appreciate it so far i have everyting wired in to my knowledge but my only issue is when i turn the key to crank her up i get nothing all teh assessories are working but nada after that i know there are users on here thats done the swap and wiring please help me out on this i feel as if something is just not making a connection but i dont know what to look for thanks in advance and please please help.....

also, and im sure this is gonna sound so stupid but i ran my 2jzgte "auto harness" and discovered it pluggewd right into the sc400 stock fuse box i know these two boxes are totally different could this be holding me back and if so how would you correct it again all and any help is appreciated thanks..

StupidSlow · 09-15-09, 08:43 PM

Just thought id post again and see if anyone can help or point me in the right direction like pulling teeth trying to find wiring information on the sc400..

StupidSlow · 10-10-09, 08:11 PM

update:

figured out the harness all is wired up it acccually was easier then i thought i think i over thought the process but i will be postring up a exact wire for wire diargram for a 2jz sc400 swap within the next couple of days for anyone else wanting to tackle this swap.

as well as video of the car running...

sc4demon · 10-10-09, 11:47 PM

kool that would be great, im still deciding on keeping my 1uz or going 2j

702SC400 · 11-01-09, 03:42 PM

This is a great swap. Looking forward to seeing this wiring diagram so I can see what to do.