Aristo swap gurus..help with CEL code 42 speed sensor
#1
Lead Lap
Thread Starter
Aristo swap gurus..help with CEL code 42 speed sensor
See sig for swap details. Aristo auto with upgraded toyota twins.
I've got about a hundred miles on it and it sounds great. Turbo's are spooling well, but I'm not feeling the torque as the turbos spool. I don't know if it's related to the vehicle speed sensor, but I popped a cell code 42 speed sensor today. Also have a code 87 on the tranny, but I can't find what that is anywhere? Any help greatly appreciated.
I've got about a hundred miles on it and it sounds great. Turbo's are spooling well, but I'm not feeling the torque as the turbos spool. I don't know if it's related to the vehicle speed sensor, but I popped a cell code 42 speed sensor today. Also have a code 87 on the tranny, but I can't find what that is anywhere? Any help greatly appreciated.
#2
Lead Lap
Thread Starter
Just to update. Fixed the power/torque issue big-time. Crazy what a little boost leak can do. Like an idiot, I didn't cap the gigantic vacuum nipple on the throttle body that is unused for power steering.
CEL 42 cleared, but I expect it to come back. Supra has issues with the way the speed sensor goes through the odometer and then farms its signal out to the ECU and speedo. I don't know if this applies to the SC. Any ideas?
CEL 42 cleared, but I expect it to come back. Supra has issues with the way the speed sensor goes through the odometer and then farms its signal out to the ECU and speedo. I don't know if this applies to the SC. Any ideas?
Thread
Thread Starter
Forum
Replies
Last Post
mrchacon
ES - 1st to 4th Gen (1990-2006)
4
07-03-09 01:37 PM