Wastegate vacuum question...T61 In Progress
07-18-09, 03:45 PM
#1
Wastegate vacuum question...T61 In Progress
Hello,
Im running a T61 with a 7psi wastegate spring. I am unsure where to connect the vaccum line from the turbo to the wastegate. Is it the side tube on the wastegate or the bottom one?
Once again i am boosting max 7psi and that is stock boost.
I dont have a boost controller in place.
Im running a T61 with a 7psi wastegate spring. I am unsure where to connect the vaccum line from the turbo to the wastegate. Is it the side tube on the wastegate or the bottom one?
Once again i am boosting max 7psi and that is stock boost.
I dont have a boost controller in place.
07-18-09, 06:30 PM
#2
Driver
Join Date: Apr 2007
Location: IL
Posts: 184
Likes: 0
Received 0 Likes
on
0 Posts
07-20-09, 01:21 PM
#4
Pole Position
iTrader: (3)
Join Date: Dec 2004
Location: Texas
Posts: 223
Likes: 0
Received 0 Likes
on
0 Posts
it's the side one for most of the wastegates , here's another diagram
http://www.tialmedia.com/documents/w..._wginstall.pdf
http://www.tialmedia.com/documents/w..._wginstall.pdf
Thread
Thread Starter
Forum
Replies
Last Post
