imarshall

iTrader: (3)

This was fixed.

gdc5ind

2jzge right?

imarshall

iTrader: (3)

Yes a 2jzge. I pulled off the intake again and checked all the plugs and wires. I believe it was cyl #4 spark plug had oil on it. Valve cover gasket was JUST changed. The oil want sitting on top though, it was on the bottom of the plug and sitting between the spark contact points causing the misfire. I just cleaned it and put it back in and it worked. I have a feeling this may occur again though..

sc300s13

i have missfires too, i need to change the plugs again on the car and clean the idle control valve and see if that works....