BigGreen

iTrader: (2)

Hello,

I am doing a 1jz swap into my sc300 and wanted to keep this as much as a sleeper as possible. I wanted to know since this car uses a MAP sensor (soarer ECU) would I be able to recirculate the BOV instead of dumping the gases into the atmosphere?

Has anyone done this or can it be done without screwing up the sensor?

1jztts

the stock BOV is already recirculating.
taking it off doesn't really screw anything up. It might run a little richer.

BigGreen

iTrader: (2)

So then does that mean I will have the necessary parts to continue to make it recirculating as long as i have the adaptor on my Greddy BOV or do i need to fabricate another set up

1jztts

you can probably use the stock hose but you may need a adapter like this depending which model you have.
You maybe able to stretch the hose over the outlet with out a adapter

BigGreen

iTrader: (2)

Ok so I can get the adaptor just need to know if its 1' or 1.25' first. then i should be good with a hose and clamp?

this is the BOV with the adaptor