Ultimate 1uzfe W58 Conversion Thread! (LOTS OF PICS!)
#213
I will have to take a trip to virginia to have a drink
Quantum-Auto has a FB page too with lots of pictures... Indulge
http://www.facebook.com/pages/Tampa-...?v=wall&ref=ts
#214
Racer
iTrader: (6)
I will have to take a trip to virginia to have a drink
Quantum-Auto has a FB page too with lots of pictures... Indulge
http://www.facebook.com/pages/Tampa-...?v=wall&ref=ts
Quantum-Auto has a FB page too with lots of pictures... Indulge
http://www.facebook.com/pages/Tampa-...?v=wall&ref=ts
#216
Driver School Candidate
The install for both transmissions is the exact same process.
The R154 is quite a bit more expensive, so weigh it like this... do you plan on just having a fun manual sc400, and not making more then 400hp? No go W58,
Do you plan on killing mkivs get a R154, but make sure you rebuild+beef up the R because with out some crucial mods the R is weaker then the W.
Or if your looking for quad digit power figures. you should talk to me about making a V160 kit, or Viper T56 kit.
The R154 is quite a bit more expensive, so weigh it like this... do you plan on just having a fun manual sc400, and not making more then 400hp? No go W58,
Do you plan on killing mkivs get a R154, but make sure you rebuild+beef up the R because with out some crucial mods the R is weaker then the W.
Or if your looking for quad digit power figures. you should talk to me about making a V160 kit, or Viper T56 kit.
1st, is this even possible with my car, or is it too late a model at this time? If it is possible, what tranny would I be looking for? I see 4 listed above, presumably from least to most expensive. Also appears that a R154 may be the most cost effective way to go for my application, but where would I find the info on modding it to better handle the expected abuse? What years/cars would this tranny be out of, to better help locate one? How much would one expect to pay for one in decent mid-milage condition?
As for the clutch pedal assy and associated shifter parts, where would one start looking for these for my model? How much would you guess I would have invested in this project, less labor of course? Thanks for any thoughts or advice, I appreciate it greatly!
#217
Pole Position
iTrader: (1)
Join Date: Mar 2006
Location: Fl
Posts: 203
Likes: 0
Received 0 Likes
on
0 Posts
Hi, just got done reading all 15 pages in this thread, and have a couple questions related to the above info. I have a 2000 LS400 that I hope to someday supercharge, and after reading this thread, possibly convert to a manual. I didn't see anything specific to my vehicle, it sounded early in the thread that later model parts are coming, but no ETA.
1st, is this even possible with my car, or is it too late a model at this time? If it is possible, what tranny would I be looking for? I see 4 listed above, presumably from least to most expensive. Also appears that a R154 may be the most cost effective way to go for my application, but where would I find the info on modding it to better handle the expected abuse? What years/cars would this tranny be out of, to better help locate one? How much would one expect to pay for one in decent mid-milage condition?
As for the clutch pedal assy and associated shifter parts, where would one start looking for these for my model? How much would you guess I would have invested in this project, less labor of course? Thanks for any thoughts or advice, I appreciate it greatly!
1st, is this even possible with my car, or is it too late a model at this time? If it is possible, what tranny would I be looking for? I see 4 listed above, presumably from least to most expensive. Also appears that a R154 may be the most cost effective way to go for my application, but where would I find the info on modding it to better handle the expected abuse? What years/cars would this tranny be out of, to better help locate one? How much would one expect to pay for one in decent mid-milage condition?
As for the clutch pedal assy and associated shifter parts, where would one start looking for these for my model? How much would you guess I would have invested in this project, less labor of course? Thanks for any thoughts or advice, I appreciate it greatly!
#218
awsome swap bro
got a few questions for you
gettin a sc400 in couple weeks waiting on a guy to find him self a new car so i can get this one
here are my questions
im going to do the tundra block swap in my sc
now will your conversion kit work with the tundra block
everything should be the same??
since lexextreme used the block with the sc400 transmission it should wrk right???
got a few questions for you
gettin a sc400 in couple weeks waiting on a guy to find him self a new car so i can get this one
here are my questions
im going to do the tundra block swap in my sc
now will your conversion kit work with the tundra block
everything should be the same??
since lexextreme used the block with the sc400 transmission it should wrk right???
#219
Pole Position
iTrader: (1)
Join Date: Mar 2006
Location: Fl
Posts: 203
Likes: 0
Received 0 Likes
on
0 Posts
awsome swap bro
got a few questions for you
gettin a sc400 in couple weeks waiting on a guy to find him self a new car so i can get this one
here are my questions
im going to do the tundra block swap in my sc
now will your conversion kit work with the tundra block
everything should be the same??
since lexextreme used the block with the sc400 transmission it should wrk right???
got a few questions for you
gettin a sc400 in couple weeks waiting on a guy to find him self a new car so i can get this one
here are my questions
im going to do the tundra block swap in my sc
now will your conversion kit work with the tundra block
everything should be the same??
since lexextreme used the block with the sc400 transmission it should wrk right???
#225
Driver School Candidate
How much is the average w58 and how much do all of these parts cost?
I'm sorry just having a difficult time scrolling through all of these pages for this answer ha I kind of need it by Saturday. Thats the day I decide to buy this sc300 or not.
I'm sorry just having a difficult time scrolling through all of these pages for this answer ha I kind of need it by Saturday. Thats the day I decide to buy this sc300 or not.