Quick Heater Hose question
#1
Lead Lap
Thread Starter
Join Date: Oct 2006
Location: texas
Posts: 581
Likes: 0
Received 0 Likes
on
0 Posts
Quick Heater Hose question
Hey,
I recently changed my headgasket on my sc300 with a 2jzgte swap, and I forgot which heater hose goes where? Does the one coming from the heater vsv go to the heater union furthest to the rear, and the hose coming from the firewall goes to the water hardline nearer to the turbos or visa versa?
Also, I'm trying to flush out all the "cheetohs" from my cooling system.
I found thishttp://www.mkiv.com/techarticles/coo...ush/index.html
But one of the steps require the car to already have coolant in it. Right now my system is bone dry. Should I refill with coolant, then add the coolant flush chemical, then drain it again to put new coolant in?
Thanks in advance for your help.
I recently changed my headgasket on my sc300 with a 2jzgte swap, and I forgot which heater hose goes where? Does the one coming from the heater vsv go to the heater union furthest to the rear, and the hose coming from the firewall goes to the water hardline nearer to the turbos or visa versa?
Also, I'm trying to flush out all the "cheetohs" from my cooling system.
I found thishttp://www.mkiv.com/techarticles/coo...ush/index.html
But one of the steps require the car to already have coolant in it. Right now my system is bone dry. Should I refill with coolant, then add the coolant flush chemical, then drain it again to put new coolant in?
Thanks in advance for your help.
Thread
Thread Starter
Forum
Replies
Last Post
PFB
ES - 1st to 4th Gen (1990-2006)
2
03-13-17 04:51 PM
greens14
Performance & Maintenance
1
02-25-13 08:30 AM