Want better low end performance, try this! It's free!
#79
ok on my 96 OBDII sc4 i had the sensor unplugged like i stated....with it unplugged the car would sometimes shift about about 5200...so i decided to plug it back in and now it shifts at redline all the time...so my next step is to try cutting the wire at the ecu.....i will keep u guys updated
#80
ok i cut the wire on my ecu but the cel came on as soon as i started the car.....with the sensor unplugged the the cel wouldnt come on till i drive the car about a mile.....so idk if its the right wire i looked at the diagram in post #53.....is it the same for obdII cars? can someone lmk if its the same wire to cut on an OBDII as on OBDI?
#81
ok i cut the wire on my ecu but the cel came on as soon as i started the car.....with the sensor unplugged the the cel wouldnt come on till i drive the car about a mile.....so idk if its the right wire i looked at the diagram in post #53.....is it the same for obdII cars? can someone lmk if its the same wire to cut on an OBDII as on OBDI?
I'd have to look into it but I bet the ECU could be tricked with the proper resistor.
KC
#82
thanks
David
#84
Lexus Test Driver
iTrader: (7)
Join Date: Oct 2006
Location: SoCal & SLOcal
Posts: 927
Likes: 0
Received 0 Likes
on
0 Posts
I unplugged that sensor tonight and went out for a test drive. First reaction: Holy Crap! you can REALLY feel the difference. Ive never been able to peel out from a stop, but tonight was the night. The tires spun like crazy.
The upside: when you step on the gas, you feel the power, the car literally pushes you back into the seat. I love it.
The downside: from 1st to 2nd gear, it shifts at 4500rpm. From 2nd to 3rd, it shifts at 5100rpm. I haven't tried from 3rd to 4th. This can get kind of annoying, but you can override it by putting it into low gear or 2nd. One more thing is, since my car is a 1996 OBDII, I got a check engine light.
Thanks a lot KC95SC400 for this find, and if you find a way to trick the ECU, let me know.
The upside: when you step on the gas, you feel the power, the car literally pushes you back into the seat. I love it.
The downside: from 1st to 2nd gear, it shifts at 4500rpm. From 2nd to 3rd, it shifts at 5100rpm. I haven't tried from 3rd to 4th. This can get kind of annoying, but you can override it by putting it into low gear or 2nd. One more thing is, since my car is a 1996 OBDII, I got a check engine light.
Thanks a lot KC95SC400 for this find, and if you find a way to trick the ECU, let me know.
#85
I unplugged that sensor tonight and went out for a test drive. First reaction: Holy Crap! you can REALLY feel the difference. Ive never been able to peel out from a stop, but tonight was the night. The tires spun like crazy.
The upside: when you step on the gas, you feel the power, the car literally pushes you back into the seat. I love it.
The downside: from 1st to 2nd gear, it shifts at 4500rpm. From 2nd to 3rd, it shifts at 5100rpm. I haven't tried from 3rd to 4th. This can get kind of annoying, but you can override it by putting it into low gear or 2nd. One more thing is, since my car is a 1996 OBDII, I got a check engine light.
Thanks a lot KC95SC400 for this find, and if you find a way to trick the ECU, let me know.
The upside: when you step on the gas, you feel the power, the car literally pushes you back into the seat. I love it.
The downside: from 1st to 2nd gear, it shifts at 4500rpm. From 2nd to 3rd, it shifts at 5100rpm. I haven't tried from 3rd to 4th. This can get kind of annoying, but you can override it by putting it into low gear or 2nd. One more thing is, since my car is a 1996 OBDII, I got a check engine light.
Thanks a lot KC95SC400 for this find, and if you find a way to trick the ECU, let me know.
I think OneSickSC has moved onto the solenoid. I suggested that he try a 4-5ohm resistor in the solenoid circuit to see if the CEL stays off. If I were you, I'd wait until he reports on his.
KC
#86
KC,
I'm gonna be doing the resister this weekend...so i will let you know.....SC-DRIVER i had mine unplugged and had the same thing happen would shift at like 5k all the time....plugged it back in an now the car shifts at redline.....when i try that resister trick i will def keep u guys updated.
David
I'm gonna be doing the resister this weekend...so i will let you know.....SC-DRIVER i had mine unplugged and had the same thing happen would shift at like 5k all the time....plugged it back in an now the car shifts at redline.....when i try that resister trick i will def keep u guys updated.
David
#87
Lexus Test Driver
iTrader: (7)
Join Date: Oct 2006
Location: SoCal & SLOcal
Posts: 927
Likes: 0
Received 0 Likes
on
0 Posts
Went out for another test run, from 1st to second it will always shift at 4500rpm, from 2nd to 3rd it will shift around ~5100rpm, and from 3rd to 4th it shifts at ~5500rpm. The shift point progressively gets higher.
Edit: I went for one more test run today, and the car WILL shift at redline when its not fully warmed up. When the temp needle stops moving up, that's when it shifts sooner. Very strange.
Edit: I went for one more test run today, and the car WILL shift at redline when its not fully warmed up. When the temp needle stops moving up, that's when it shifts sooner. Very strange.
Last edited by sc-driver; 12-24-08 at 02:51 PM. Reason: new information
#89
Lexus Test Driver
iTrader: (7)
Join Date: Oct 2006
Location: SoCal & SLOcal
Posts: 927
Likes: 0
Received 0 Likes
on
0 Posts
I have been reviewing the .pdf file KC uploaded in post #21, it seems that tricking the ECU with a simple resistor will not be possible. The ECU is reading the time it takes for each completed period. (The number of voltage spikes per millisecond) A resistor in series or parallel form will not affect this period at all. The signal still gets through with the same period.
In order to have the same "effect" as disconnecting the speed sensor while not throwing a CEL you would have to be able to minimize and decrease to voltage spikes while driving. This should also fix the early shift points. I was thinking maybe somehow being able to make it read as if it were at idle all the time.
Or like I said earlier, maybe adjusting the TPS sensor can make up for it, but the long term effects may be bad. I cant seem to try it because those screws are stripped very badly.
https://www.clublexus.com/forums/per...-shifting.html
OneSickSC try adjusting that to see if it makes a difference. It wont make the CEL go away but it may help the shift points.
I believe solving this may be a good way to get those OBDII SC's to enjoy their low end power.
Yet it still confuses me how the car is able to shift at red line when the car is still cold.
David
In order to have the same "effect" as disconnecting the speed sensor while not throwing a CEL you would have to be able to minimize and decrease to voltage spikes while driving. This should also fix the early shift points. I was thinking maybe somehow being able to make it read as if it were at idle all the time.
Or like I said earlier, maybe adjusting the TPS sensor can make up for it, but the long term effects may be bad. I cant seem to try it because those screws are stripped very badly.
https://www.clublexus.com/forums/per...-shifting.html
OneSickSC try adjusting that to see if it makes a difference. It wont make the CEL go away but it may help the shift points.
I believe solving this may be a good way to get those OBDII SC's to enjoy their low end power.
Yet it still confuses me how the car is able to shift at red line when the car is still cold.
David
#90
alright i did one test run with the wire cut at the ecu(cel on) wit the car at normal operating temp....car shifted fine at redline.....but with the sensor unplugged it shifted at 5k as i stated above......so i think for us OBDII guys we might have to just cut the wire and deal with the cel on unless some can figure out how to trick the ecu.....
David
David