engine bay update!
Trending Topics
#8
Lexus Champion
Thread Starter
iTrader: (53)
Join Date: Apr 2008
Location: CA
Posts: 3,240
Likes: 0
Received 0 Likes
on
0 Posts
thanks guys, it was about 2 weeks since but did some little by little as i have school and other work to do. [also doing a mk3 7mge swap] so yeah, sorry OLT, please give me some mercy as all i did was do cleaning up, not that i changed any parts at all, if anything other then cleaning was i bent the broken intake bracket back up...
even curry's "new ride!" thread has a turbo kit installation, maintance, recovery, and its in the regular threads...?
i hope this was just a mistake.
even curry's "new ride!" thread has a turbo kit installation, maintance, recovery, and its in the regular threads...?
i hope this was just a mistake.
#14
Driver School Candidate
Join Date: May 2008
Location: idaho
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
I did my own little cleanup. I didn't take a before picture but it was caked with sludge. I used Costco degreaser at full strength and a little brushing then rinsed with a pressure washer. I don't know if you can tell but the plastic parts look brand new. I am very impressed with this degreaser. I have tried many over the years but this is the best I have used.
#15
I did my own little cleanup. I didn't take a before picture but it was caked with sludge. I used Costco degreaser at full strength and a little brushing then rinsed with a pressure washer. I don't know if you can tell but the plastic parts look brand new. I am very impressed with this degreaser. I have tried many over the years but this is the best I have used.