Silicone Hoses
#1
Lead Lap
Thread Starter
Join Date: Aug 2003
Location: Colorado
Posts: 471
Likes: 0
Received 0 Likes
on
0 Posts
Silicone Hoses
I try to search around here and could not find anything on replacing hoses. There are some pictures and that is it. Does any one have hose diagram. Also mine kit hoses are thinner so the stock clams don't work what arte you guys using.
#2
Lead Lap
iTrader: (1)
Where did you get your kit from? Do you know the sizes (in mm) of the hoses you got? I posted a thread about this last week, but no one will respond
I believe that the smallest hoses are 3.5mm, and from what I understand the "tighter" the fit the better. A snug fit is good, so if is not too tight to fit in general, you should be good.
Clarification from someone who has actually replaced these would be great!
I believe that the smallest hoses are 3.5mm, and from what I understand the "tighter" the fit the better. A snug fit is good, so if is not too tight to fit in general, you should be good.
Clarification from someone who has actually replaced these would be great!
#3
Lead Lap
Thread Starter
Join Date: Aug 2003
Location: Colorado
Posts: 471
Likes: 0
Received 0 Likes
on
0 Posts
I got from e-bay it comes with 25 ft of hoses and three diffrent size. The bigest one is for brake booster and small ones are for power steering hoses.
wHen I get home I can check on sizes and let you know. Stock clams don't work with them.
wHen I get home I can check on sizes and let you know. Stock clams don't work with them.
Thread
Thread Starter
Forum
Replies
Last Post