New exhaust on my 1jz SC 4" hotness (no56k)
04-27-08, 07:24 AM
#1
New exhaust on my 1jz SC 4" hotness (no56k)
Hello all, newest modifications have come along on the car and its finally where and what i want it to sound like. i will have some better pictures and a sound clip later today.
but heres the exhaust to keep you looking.
its a 4 inch mid to 3 inch duals into a set of Aspec Mufflers. 3 in 4.25 out with a 7 inch tip length.
full stainless, tig welded and Vbanded so it can be easly removed.
im trying to think is theres anymore information.
if i say the cost of it very fast it doesent hurt that bad but it was very pricy imo.
as i always say, do it once, do it right!
yes 4 inch is huge but i plan to push some power later down the road and do not want a new exhaust!
the mufflers are sitting a bit lower then i wanted but it will be going back in the shop to get reworked soon.
also as you can see its got a reducer on the front to bolt to stock downpipe. once i do a 4 inch downpipe on single turbo that will be cut off and a flex pipe will be put in and a then the downpipe will be added.
here is the mufflers alone.
mock fit of how i really wanted the muffler to sit.
but heres the exhaust to keep you looking.
its a 4 inch mid to 3 inch duals into a set of Aspec Mufflers. 3 in 4.25 out with a 7 inch tip length.
full stainless, tig welded and Vbanded so it can be easly removed.
im trying to think is theres anymore information.
if i say the cost of it very fast it doesent hurt that bad but it was very pricy imo.
as i always say, do it once, do it right!
yes 4 inch is huge but i plan to push some power later down the road and do not want a new exhaust!
the mufflers are sitting a bit lower then i wanted but it will be going back in the shop to get reworked soon.
also as you can see its got a reducer on the front to bolt to stock downpipe. once i do a 4 inch downpipe on single turbo that will be cut off and a flex pipe will be put in and a then the downpipe will be added.
here is the mufflers alone.
mock fit of how i really wanted the muffler to sit.
04-27-08, 07:26 AM
#3
reserved spot for better pics and video sound clip of the exhaust
you tube link
http://www.youtube.com/watch?v=4fTWfDhOOlY
you tube link
http://www.youtube.com/watch?v=4fTWfDhOOlY
Last edited by Biggu; 04-27-08 at 05:25 PM.
Trending Topics
04-27-08, 11:14 AM
#10
Lexus Champion
Beautiful 
One the best engineered exhaust systems I have seen (and I have seen MANY).
Post the name of the craftsman at Aspec. I would not call them a muffler shop instead and exhaust design facility.
Do you have any ground clearance pictures?
One the best engineered exhaust systems I have seen (and I have seen MANY).
Post the name of the craftsman at Aspec. I would not call them a muffler shop instead and exhaust design facility.
Do you have any ground clearance pictures?
