Leak problem....
#1
Driver School Candidate
Thread Starter
Join Date: Dec 2006
Location: FL
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
Leak problem....
The vacuum module for the vacuum sensor that screws into the banjo of the high pressure PS line (at the pump) is leaking through the threads of the vacum sensor. I tighten it and it still leaks.
It is not leak from the bolts that hold the high pressure line to the pump.
Is there a washer or something that goes where the vacuum sensor screws into the high pressure line?
It is not leak from the bolts that hold the high pressure line to the pump.
Is there a washer or something that goes where the vacuum sensor screws into the high pressure line?
Thread
Thread Starter
Forum
Replies
Last Post
Tau511
Performance & Maintenance
0
02-23-16 06:43 PM
enterconne
ES - 1st to 4th Gen (1990-2006)
7
02-15-12 04:30 AM
Dx3
SC- 1st Gen (1992-2000)
5
04-04-10 10:40 PM