1jz fuel cut at 120, govenor can it be removed?
#1
Driver
Thread Starter
Join Date: Dec 2007
Location: Texas
Posts: 114
Likes: 0
Received 0 Likes
on
0 Posts
1jz fuel cut at 120, govenor can it be removed?
I have searched, and have found nothing. I am sure it is out there!!! Can somebody tell me how to disable it? or the thread describing it? THanks!!!
Trending Topics
#13
Driver
Thread Starter
Join Date: Dec 2007
Location: Texas
Posts: 114
Likes: 0
Received 0 Likes
on
0 Posts
Well, I was browsing around.. I found this, have you heard of it?
http://www.geocities.com/jza71/noboostcut.html
Defeat boost cut:
4.7v zener diode part number = 1n4732
Wire the zener diode from signal BLUE/BLACK (L B 3) to ground BROWN (BR1) with the band facing the signal wire.
WARNING: OVER BOOSTING WILL CAUSE ENGINE FAILURE
WITH OUT PROPER TUNING AND MANAGEMENT
http://www.geocities.com/jza71/noboostcut.html
Defeat boost cut:
4.7v zener diode part number = 1n4732
Wire the zener diode from signal BLUE/BLACK (L B 3) to ground BROWN (BR1) with the band facing the signal wire.
WARNING: OVER BOOSTING WILL CAUSE ENGINE FAILURE
WITH OUT PROPER TUNING AND MANAGEMENT
Thread
Thread Starter
Forum
Replies
Last Post