mattsmall

all started when i spun a rod bearing in my 1jz



new oem toyota 2jz-gte short block
new oem toyota oil pump
shimmed oil pick up
every gasket replaced
arp head studs
oem toyota head gasket
port and polish head
crowler valve springs
HKS 272/264 cams
adjustable cam gears
T4 exhaust manifold
tial 40mm wastegate
greddy t78-33d
all vac hoses are ss
mvp motor sports top feed fuel rail
RC 800cc injectors
veilside replica intake manifold
80mm throttle body
dual ssqv bov's
2jz wiring harness
aem ems
aem 3 bar map sensor
24x12x4 inch front mount
2.5 inch hot side intercooler piping
3 inch cold side intercooler piping
areomotive feul pressure regulator

and much more i know i am forgetting a few things that i cant remember.




i found some free time tonight....

finished the motor

bolted the motor to the car

LiCelsior

iTrader: (32)

damn...MD is growing in boosted SCs.

twizted

iTrader: (2)

Yeah and it only tooks about 16 years of sc heritage lol My gta just spun a bearing, it must have worn the main down about 1/8" crazy!

5sp_jzz30

iTrader: (2)

so did u build a 1.5jz out of this "mishap"? nice job

twizted

iTrader: (2)

??? isnt that the point of this thread, he built a 2jz instead. Did i miss somthing?

SCoupe

A 2jz on a stand is a menacing sight. They are spectacular engines and look mean as hell. The build on yours is sweet, great list...

yelloa3gti

Yea for real.. I wish I would see other boosted SCs on the road.. SICK setup

plex

iTrader: (11)

It's a 1.5JZ aka 1jz head on 2jzgte block. Not a full 2jzgte.


Nice job Matt, next season is going to be crazy with all the boosted SC's around here. I will need to go single sooner than I planned lol.

1JZ300

iTrader: (6)

nice build bro.....

parnzen

nice build. good luck

bigmalik00

That engine looks good!

MD= home of the Boost Boys!....I am about 6 months out. I think Fonzo is next!

mattsmall

yeah it was a total accident when i went to Toyota and ordered a 2jz-gte short block assembly read the main post before you reply.

thanks bro


why??? are you trying to keep up with the big dawgs now rofl i thought you were going to rock the stock twins for as long as you could i think (val)(sp) has a faster sc then me

i offered to help Fonzo with his car but he never said anything back i guess he has it covered on his own

Rexn30

Question about the 1.5, do you use a 1jz wiring harness or a 2jz? And which ecu do you use? You proly use the 2jz ecu and wiring harness?

mattsmall

1jz wiring and ecu works fine with a piggy back, i went with jdm 2jz wiring and aem ems.

Ali y0

Very nice, good luck with it!