Performance & Maintenance Engine, forced induction, intakes, exhausts, torque converters, transmissions, etc.

Edit: Issue solved

Thread Tools
 
Search this Thread
 
Old 11-14-07, 02:18 PM
  #1  
SGrundy
Driver School Candidate
Thread Starter
 
SGrundy's Avatar
 
Join Date: May 2006
Location: ky
Posts: 6
Likes: 0
Received 0 Likes on 0 Posts
Default Edit: Issue solved

On a SC300, I replaced the plugs, wires, rotor, and distributor o-ring(removed distributor according to https://www.clublexus.com/forums/sho...replace&page=2).

When attemping to start the vehicle, it will turn over, but the idle is uneven and gets weaker by the second. There is also quite a bit of smoke coming out of the exhaust.


Edit: Nevermind, I'm an idiot. I forgot to hook up the sensor near the air filter.

Last edited by SGrundy; 11-14-07 at 02:32 PM.
Old 11-14-07, 02:28 PM
  #2  
caleb11210
Driver School Candidate
 
caleb11210's Avatar
 
Join Date: Nov 2007
Location: New York
Posts: 42
Likes: 0
Received 0 Likes on 0 Posts
Default

did the car do that before you replaced all that?
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
jaxscuby
LS - 1st and 2nd Gen (1990-2000)
17
05-04-22 07:06 PM
Tartar
ES - 1st to 4th Gen (1990-2006)
0
11-10-18 02:27 PM
guccigirl
RX - 1st Gen (1999-2003)
4
02-10-14 07:04 AM
kyddo112
SC- 1st Gen (1992-2000)
11
02-20-11 09:35 AM
hellasboy
Maintenance
3
03-10-04 08:55 PM



Quick Reply: Edit: Issue solved



All times are GMT -7. The time now is 01:55 AM.