ClubLexus' Top 20 Fastest SC300's
06-18-10, 11:29 PM
#122
just got back from clay city dragway. the same track that holds the record for 2nd fastest sc in the US set by hal at injected performance (9.39) and i ran a 9.40 sideways until i blew an intercooler pipe, blew one (same one) every pass. i will be correcting that problem and setting the record within the next week or 2. i will post the time slip in the morning when i get up
06-19-10, 10:39 AM
#124
Driver School Candidate
Join Date: Apr 2007
Location: CT
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Might as well update this one:
10.96 @ 125.2 - Witckraft - 2JZGTE, TH400, 58mm, AEM (1.73 60')
slips: http://home.comcast.net/~peter.tomeo/slips.jpg
10.96 @ 125.2 - Witckraft - 2JZGTE, TH400, 58mm, AEM (1.73 60')
slips: http://home.comcast.net/~peter.tomeo/slips.jpg
06-19-10, 12:42 PM
#125
Lead Lap
Join Date: Feb 2002
Location: California
Posts: 774
Likes: 0
Received 0 Likes
on
0 Posts
just got back from clay city dragway. the same track that holds the record for 2nd fastest sc in the US set by hal at injected performance (9.39) and i ran a 9.40 sideways until i blew an intercooler pipe, blew one (same one) every pass. i will be correcting that problem and setting the record within the next week or 2. i will post the time slip in the morning when i get up
07-03-10, 10:47 PM
#127
Lead Lap
iTrader: (4)
Join Date: Sep 2007
Location: NM
Posts: 719
Likes: 0
Received 0 Likes
on
0 Posts
I hope to land up the list next time I get to the track. I went before I pulled the engine this last time and upgraded some thing. I did 3.3 @111mph and a 2.3 60'. I'm hoping to hook with some ET streets and break into the 120mph.
08-04-10, 10:31 AM
#128
umm 3.3... i dont think it was 3.3, maybe 7.3
We'll see next time, now I have a fully built motor. It won't help if I can't get traction, It wouldn't take full throttle until 3rd.
08-04-10, 10:21 PM
#133
Lead Lap
iTrader: (4)
Join Date: Sep 2007
Location: NM
Posts: 719
Likes: 0
Received 0 Likes
on
0 Posts
stock head, L19 head studs, ferrea dual springs, GSC1 cams.
One TT fuel pump w/-6 feed, 630 injectors, and FPR.
Tuner for now is a JDM blitz access ECU w/safc
I dyno'd the car stock fuel, head, cams and 14lbs of boost. I did 470whp uncorrected on a dynojet this is what it was at when I went to the track. I then did all the upgrades above and with the meth tuned the car for 23lbs. I never dyno'd it but it was a big difference.
One TT fuel pump w/-6 feed, 630 injectors, and FPR.
Tuner for now is a JDM blitz access ECU w/safc
I dyno'd the car stock fuel, head, cams and 14lbs of boost. I did 470whp uncorrected on a dynojet this is what it was at when I went to the track. I then did all the upgrades above and with the meth tuned the car for 23lbs. I never dyno'd it but it was a big difference.
Last edited by LCSC; 08-06-10 at 07:56 AM.
09-04-10, 01:44 AM
#134
Lead Lap
iTrader: (4)
Join Date: Sep 2007
Location: NM
Posts: 719
Likes: 0
Received 0 Likes
on
0 Posts
OK finally went to the track.
60' 1.55
ET 11.29
MPH 129.53
GTE, v160, pte6262,v160, TRD LSD W/gs400 3.26 gears, 24-28 psi, meth/water injection and......ET Streets
60' 1.55
ET 11.29
MPH 129.53
GTE, v160, pte6262,v160, TRD LSD W/gs400 3.26 gears, 24-28 psi, meth/water injection and......ET Streets
Last edited by LCSC; 09-04-10 at 08:28 PM.
