hi there
#1
Rookie
Thread Starter
Join Date: Dec 2005
Location: california
Posts: 90
Likes: 0
Received 0 Likes
on
0 Posts
hi there
never really post much...but I figured for the current undertaking I would.
So anyway As the sig says I have a 1993 sc300. I picked it up out of south central LA about a year ago(has it been that long allready?) never going back there btw...Anywho it is 5 speed the whole nine and in pretty decent condition to be honest. I went na-t but you know how that goes...so the motor finally started to burn oil at 185k and I am going as nuts with it as I possibly can on a military salary. So far my iraq deployment funds have acquired:
two volk sf challenges 19x8.5 front and 19x10.5 rear through a unfortunate 350z owners run in with paint,
a yanack front bumper,
a jdm 2jzgte,
a Getrag Billet SS
and the obligatory trd shift **** as mine is thrashed.
from teh na-t of doomness I will be using:
ARC clone intercooler
ARC Bov
GT35 Turbo
50MM Wastgate
3" Intercooler piping
3" Downpipe
Custom 3" mandrel mid pipe
HKS Carbon-ti exhaust
Revo 52mm Boost Meter
I guess onto my goal to include the Getrag I hope...they are REALLY getting pricey though, and looking into a haltech standalone with more to be figured out as I go.
Anyway I plan to keep everyone up to date on this as it is my pride and joy and hope someday it will be something worth looking at.
Thanks for letting me waste your time haha, and thanks to all of those who have helped with the last bit of this destroyer of budgets
new added!
550 cc nippondenso injectors
JIC-Magic sideskirts the real ones
McCulloch 5300k HID SC300 Kit
Supra TT Fuel Pump
Ab Flug rear spoiler
List as stands:
solid billet motor mounts
Jdm 2jzgte motor
Supra TT Fuel Pump (450rwhp)
Blue viton valve seals
Billet ss
TT calipers
Billet pulleys
GT35 turbo
4" Stainless intake tube
HKS green filter
3" downpipe
3" mid pipe
hks carbon-ti sc modded cat back
50mm wastegate
ARC BOV
1000whp delta fin intercooler
3" mandrel intercooler piping
530hp Clutch
Revo 52mm boost gauge
Apexi S-afc
Apexi s-itc
Aem uego
Yanack Front Bumper
TRD shift ****
apexi coilovers
Ab flug rear spoiler
JIC MAGIC sideskirts
McCulloch 5300k HID SC300 Kit
NipponDenso 550cc Injectors
So anyway As the sig says I have a 1993 sc300. I picked it up out of south central LA about a year ago(has it been that long allready?) never going back there btw...Anywho it is 5 speed the whole nine and in pretty decent condition to be honest. I went na-t but you know how that goes...so the motor finally started to burn oil at 185k and I am going as nuts with it as I possibly can on a military salary. So far my iraq deployment funds have acquired:
two volk sf challenges 19x8.5 front and 19x10.5 rear through a unfortunate 350z owners run in with paint,
a yanack front bumper,
a jdm 2jzgte,
a Getrag Billet SS
and the obligatory trd shift **** as mine is thrashed.
from teh na-t of doomness I will be using:
ARC clone intercooler
ARC Bov
GT35 Turbo
50MM Wastgate
3" Intercooler piping
3" Downpipe
Custom 3" mandrel mid pipe
HKS Carbon-ti exhaust
Revo 52mm Boost Meter
I guess onto my goal to include the Getrag I hope...they are REALLY getting pricey though, and looking into a haltech standalone with more to be figured out as I go.
Anyway I plan to keep everyone up to date on this as it is my pride and joy and hope someday it will be something worth looking at.
Thanks for letting me waste your time haha, and thanks to all of those who have helped with the last bit of this destroyer of budgets
new added!
550 cc nippondenso injectors
JIC-Magic sideskirts the real ones
McCulloch 5300k HID SC300 Kit
Supra TT Fuel Pump
Ab Flug rear spoiler
List as stands:
solid billet motor mounts
Jdm 2jzgte motor
Supra TT Fuel Pump (450rwhp)
Blue viton valve seals
Billet ss
TT calipers
Billet pulleys
GT35 turbo
4" Stainless intake tube
HKS green filter
3" downpipe
3" mid pipe
hks carbon-ti sc modded cat back
50mm wastegate
ARC BOV
1000whp delta fin intercooler
3" mandrel intercooler piping
530hp Clutch
Revo 52mm boost gauge
Apexi S-afc
Apexi s-itc
Aem uego
Yanack Front Bumper
TRD shift ****
apexi coilovers
Ab flug rear spoiler
JIC MAGIC sideskirts
McCulloch 5300k HID SC300 Kit
NipponDenso 550cc Injectors
Last edited by motorswaps; 08-10-07 at 07:02 PM. Reason: updated!
#3
Lexus Test Driver
iTrader: (7)
Join Date: Apr 2007
Location: AZ
Posts: 922
Likes: 0
Received 0 Likes
on
0 Posts
never really post much...but I figured for the current undertaking I would.
So anyway As the sig says I have a 1993 sc300. I picked it up out of south central LA about a year ago(has it been that long allready?) never going back there btw...Anywho it is 5 speed the whole nine and in pretty decent condition to be honest. I went na-t but you know how that goes...so the motor finally started to burn oil at 185k and I am going as nuts with it as I possibly can on a military salary. So far my iraq deployment funds have acquired:
two volk sf challenges 19x8.5 front and 19x10.5 rear through a unfortunate 350z owners run in with paint,
a yanack front bumper,
a jdm 2jzgte,
a Getrag Billet SS
and the obligatory trd shift **** as mine is thrashed.
from teh na-t of doomness I will be using:
ARC clone intercooler
ARC Bov
GT35 Turbo
50MM Wastgate
3" Intercooler piping
3" Downpipe
Custom 3" mandrel mid pipe
HKS Carbon-ti exhaust
Revo 52mm Boost Meter
I am currently working on picking up some supra tt calipers and apexi/eibach adjustable suspension. Then onto my goal to include the Getrag I hope...they are REALLY getting pricey though, and a haltech standalone with more to be figure out as I go.
Anyway I plan to keep everyone up to date on this as it is my pride and joy and hope someday it will be something worth looking at.
Thanks for letting me waste your time haha, and thanks to all of those who have helped with the last bit of this destroyer of budgets
So anyway As the sig says I have a 1993 sc300. I picked it up out of south central LA about a year ago(has it been that long allready?) never going back there btw...Anywho it is 5 speed the whole nine and in pretty decent condition to be honest. I went na-t but you know how that goes...so the motor finally started to burn oil at 185k and I am going as nuts with it as I possibly can on a military salary. So far my iraq deployment funds have acquired:
two volk sf challenges 19x8.5 front and 19x10.5 rear through a unfortunate 350z owners run in with paint,
a yanack front bumper,
a jdm 2jzgte,
a Getrag Billet SS
and the obligatory trd shift **** as mine is thrashed.
from teh na-t of doomness I will be using:
ARC clone intercooler
ARC Bov
GT35 Turbo
50MM Wastgate
3" Intercooler piping
3" Downpipe
Custom 3" mandrel mid pipe
HKS Carbon-ti exhaust
Revo 52mm Boost Meter
I am currently working on picking up some supra tt calipers and apexi/eibach adjustable suspension. Then onto my goal to include the Getrag I hope...they are REALLY getting pricey though, and a haltech standalone with more to be figure out as I go.
Anyway I plan to keep everyone up to date on this as it is my pride and joy and hope someday it will be something worth looking at.
Thanks for letting me waste your time haha, and thanks to all of those who have helped with the last bit of this destroyer of budgets
I helped out in that for sure, but whats wrong with NA-T? Is it not so great because you have 180k+ ?? I'm going NA-T with 103, but I'm getting a factory block and having it worked on prior... still bad idea?
#4
Rookie
Thread Starter
Join Date: Dec 2005
Location: california
Posts: 90
Likes: 0
Received 0 Likes
on
0 Posts
Thanks lax!
Haha...yuma, you are the man for getting me that motor. DEFF nothing wrong with na-tizzle, I just had an old motor and wanted to do a lot of stuff to my motor that the jdm gte allready has, like the radiator return, dizzy delete, map sensor instead of karmon(sp?) vortex. You know, that stuff. I have a lot of nat stuff to sell including ls 400 maf, safc etc...
Haha...yuma, you are the man for getting me that motor. DEFF nothing wrong with na-tizzle, I just had an old motor and wanted to do a lot of stuff to my motor that the jdm gte allready has, like the radiator return, dizzy delete, map sensor instead of karmon(sp?) vortex. You know, that stuff. I have a lot of nat stuff to sell including ls 400 maf, safc etc...
#5
Rookie
Thread Starter
Join Date: Dec 2005
Location: california
Posts: 90
Likes: 0
Received 0 Likes
on
0 Posts
oh yeah...parts added just paid for the Supra tt calipers...hopefully they rock as hard as everyone says...and billet pulleys to add a little bling love to the engine bay.
Trending Topics
#9
Rookie
Thread Starter
Join Date: Dec 2005
Location: california
Posts: 90
Likes: 0
Received 0 Likes
on
0 Posts
I will be selling several things here soon
3" REAL hks green filter
Apexi S-itc
Apexi S-afc (both **** style I love em but standalone needs $$$)
An aem uego with the little datalogger box maybe 1k on them when I bought them unused by me
Jdm TT auto trans
na-t exh manifold it was one of the cheap ones but gone over by welder and works flawlessly
And possibly an arc bov
#10
Rookie
Thread Starter
Join Date: Dec 2005
Location: california
Posts: 90
Likes: 0
Received 0 Likes
on
0 Posts
oh yeah, update!!!!
More parts arriving or in the mail!!!
Solid billet motor mounts
Blue viton valve seals
TT calipers
Billet pulleys
4" Stainless intake tube
HKS green filter
1000whp delta fin intercooler
530hp Clutch
More parts arriving or in the mail!!!
Solid billet motor mounts
Blue viton valve seals
TT calipers
Billet pulleys
4" Stainless intake tube
HKS green filter
1000whp delta fin intercooler
530hp Clutch
#12
Lexus Test Driver
iTrader: (5)
Join Date: Jan 2005
Location: CA
Posts: 996
Likes: 0
Received 0 Likes
on
0 Posts
if possible could you email me when you sell your stuff i would appriciate it. maybe we can trade for something....i got a few things lying around you may be interested in. thanks superiorconcepts2006@yahoo.com
#13
Rookie
Thread Starter
Join Date: Dec 2005
Location: california
Posts: 90
Likes: 0
Received 0 Likes
on
0 Posts
definately will, I would be more than glad to talk now, it is just somewhat harder to have someone else do stuff for you in terms of removal.
oh yeah I have the 400 maf too
oh yeah I have the 400 maf too
#14
Lexus Test Driver
iTrader: (7)
Join Date: Apr 2007
Location: AZ
Posts: 922
Likes: 0
Received 0 Likes
on
0 Posts
Well you DON'T have a 2JZGTE Yet... seeing as you haven't sent a convoy to come get it. Its still sitting there and I'm being charged every day that it sits... whats the good word? Send a PM downrange or something.. I need to know. Rah.