Valve Covers
07-15-06, 03:49 PM
#1
Valve Covers
hey guys this week i plan on doing my plugs wires dist, o ring, and valve cover gasket on my 97 sc300, i just wanted to know what parts would i need to buy from toyota to do the valve cover gasket job.
i need:
2 gaskets left and right
valve cover gasket sealer tube from toyota
anything else??????????? would i need those washers for the bolts? or no? anythign else you can think of? any gaskets for the "Y" intake manufold?
i need:
2 gaskets left and right
valve cover gasket sealer tube from toyota
anything else??????????? would i need those washers for the bolts? or no? anythign else you can think of? any gaskets for the "Y" intake manufold?
07-16-06, 04:33 AM
#3
Lead Lap
iTrader: (1)
Join Date: Jan 2003
Location: California
Posts: 654
Likes: 0
Received 0 Likes
on
0 Posts
I didn't use any FIPG when i took my valve covers off and currently have no leaks 
. It does say to apply a little near the cam caps in the FSM 
. I'd do it if you already have the sealer but if you don't its not a big deal. Im probably going to apply some when i take my valve covers off to polish since im a stickler for following the FSM 
.
. It does say to apply a little near the cam caps in the FSM . I'd do it if you already have the sealer but if you don't its not a big deal. Im probably going to apply some when i take my valve covers off to polish since im a stickler for following the FSM .
Thread
Thread Starter
Forum
Replies
Last Post
99custom
ES - 1st to 4th Gen (1990-2006)
17
03-21-18 02:00 PM
CF01
ES - 1st to 4th Gen (1990-2006)
8
12-26-15 02:03 AM