Stroked SC300 progress
04-19-06, 05:51 AM
#1
Lead Lap
Thread Starter
Stroked SC300 progress
Just an update on my current project. Since I bent most of my stock rods last year on my motor, it was decided to try something different. So the setup will be a custom Sound Performance stroker motor. I can't disclose any measurements, etc... but if anyone does have questions, I'll forward you on to Larry at SP.
Waiting on my very large custom cams this week, and we can finish up some other little stuff like oil lines, etc.... I hope to have the car up and running in a max of 2 weeks, but will take the time needed.
The combo should get us around 1100+rwhp
SP Stroker motor
SP racing header
GT47-80
Built head (custom cams, ferrea springs, +1mm valves, and port/polish) using L19 head studs
SP race intake
1600 cc injectors
3 walbro pumps ( for now) possibly going to an external weldon soon
Here are some quick pictures I took while I spent all day yesterday assembling the bottom end.
Billet mains
L19 head studs, yum!
This is a custom SP mod that is supposed to add 10hp per cyl
I'll update this thread when I make some progress and get the head/turbo, etc.. on, and finally getting it started.
Chris
Waiting on my very large custom cams this week, and we can finish up some other little stuff like oil lines, etc.... I hope to have the car up and running in a max of 2 weeks, but will take the time needed.
The combo should get us around 1100+rwhp
SP Stroker motor
SP racing header
GT47-80
Built head (custom cams, ferrea springs, +1mm valves, and port/polish) using L19 head studs
SP race intake
1600 cc injectors
3 walbro pumps ( for now) possibly going to an external weldon soon
Here are some quick pictures I took while I spent all day yesterday assembling the bottom end.
Billet mains
L19 head studs, yum!
This is a custom SP mod that is supposed to add 10hp per cyl
I'll update this thread when I make some progress and get the head/turbo, etc.. on, and finally getting it started.
Chris
04-19-06, 05:55 AM
#2
Lexus Test Driver
LOL the picture on the first cylinder is PRICELESS, I think that picture alone will get you to 1200rwhp, take my word for it 
Good luck on your project! I hope to see a dyno sheet showing 1100rwhp when this is all said and done, what a BEAST you have put together!
Good luck on your project! I hope to see a dyno sheet showing 1100rwhp when this is all said and done, what a BEAST you have put together!
Trending Topics
04-19-06, 09:47 AM
#8
Lead Lap
Thread Starter
Thank you guys. I should also thank my wife for here amazing amount of patience 
Josh, I'm definitely gunning for some 8's. I'd be satisfied with an 8.9999999
Chris
Josh, I'm definitely gunning for some 8's. I'd be satisfied with an 8.9999999
Chris
04-19-06, 10:00 AM
#9
Lexus Fanatic
Originally Posted by quikturbo
Thank you guys. I should also thank my wife for here amazing amount of patience
Josh, I'm definitely gunning for some 8's. I'd be satisfied with an 8.9999999
Chris
Josh, I'm definitely gunning for some 8's. I'd be satisfied with an 8.9999999
Chris
Your wife is OK with all this?!
Thats a keeper then!!!
04-19-06, 10:07 AM
#10
Lead Lap
Thread Starter
Originally Posted by Richie
Chris,
Your wife is OK with all this?!
Thats a keeper then!!!
Your wife is OK with all this?!
Thats a keeper then!!!
kidding. She's very supportive and knows this is my passion, I just have to be reasonable
04-19-06, 10:10 AM
#11
Lexus Test Driver
Originally Posted by quikturbo
Define "OK" Richie kidding. She's very supportive and knows this is my passion, I just have to be reasonable
kidding. She's very supportive and knows this is my passion, I just have to be reasonable 
I wonder what she is like in bed
does "reasonable" fly there too?
04-19-06, 10:14 AM
#12
Lexus Fanatic
Originally Posted by quikturbo
Define "OK" Richie kidding. She's very supportive and knows this is my passion, I just have to be reasonable
kidding. She's very supportive and knows this is my passion, I just have to be reasonable I think you are very reasonable
04-19-06, 12:19 PM
#15
Driver School Candidate
Join Date: Mar 2006
Location: Texas
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by quikturbo
I just have to be reasonable
Gregg