Can someone with a 1JZ PLEASE tell me where these two connectors go?! (Pics inside)
#1
Lead Lap
Thread Starter
Join Date: May 2005
Location: OH
Posts: 582
Likes: 0
Received 0 Likes
on
0 Posts
Can someone with a 1JZ PLEASE tell me where these two connectors go?! (Pics inside)
Sorry for the new thread, my old thread would not let me edit the title, and the current title has nothing to do with my question.
Anyway, can someone with a 1JZ PLEASE take 5 minutes and check out their car for me, when you get some free time? I'm down to four connectors on my wiring harness that are cut off. They are highlighted in the picture below. Two of them go to the ignitor, which I have ordered. I will be getting the connectors for this off of a 1995 Avalon since they use the same ignitor.
However, the other two connectors I have absolutely no idea what they go to, and can't find anything on the car that has plugs like that. They are right off of the ignitor harness, so they look to be in the same general area.... right near the ignitor and the fuse box.
If I can't find out what they go to, it will be impossible for me to find replacement connectors and get this swap working.
I spent all day today trying to find the answer... the Toyota dealer was not of any help, and as always the people at Lexus were VERY helpful... but unfortunately after spending 30 minutes with the parts manager at Metro Lexus (here in Cleveland) flipping through service manuals, we couldn't find anything.
THANK YOU for any help you can offer!
Anyway, can someone with a 1JZ PLEASE take 5 minutes and check out their car for me, when you get some free time? I'm down to four connectors on my wiring harness that are cut off. They are highlighted in the picture below. Two of them go to the ignitor, which I have ordered. I will be getting the connectors for this off of a 1995 Avalon since they use the same ignitor.
However, the other two connectors I have absolutely no idea what they go to, and can't find anything on the car that has plugs like that. They are right off of the ignitor harness, so they look to be in the same general area.... right near the ignitor and the fuse box.
If I can't find out what they go to, it will be impossible for me to find replacement connectors and get this swap working.
I spent all day today trying to find the answer... the Toyota dealer was not of any help, and as always the people at Lexus were VERY helpful... but unfortunately after spending 30 minutes with the parts manager at Metro Lexus (here in Cleveland) flipping through service manuals, we couldn't find anything.
THANK YOU for any help you can offer!
Last edited by JJG2005; 03-21-06 at 02:58 PM.
#3
Lexus Champion
Join Date: May 2005
Location: Central FL
Posts: 1,973
Likes: 0
Received 0 Likes
on
0 Posts
The only thing that plugs into the ignitor stretch of wires off the loom, is the ignitor. Im taking lunch break in about 5 mins i could go check my car. Whats your cell #?
#4
Lexus Champion
Join Date: May 2005
Location: Central FL
Posts: 1,973
Likes: 0
Received 0 Likes
on
0 Posts
Very intresting, my 1992 Soarer 1JZ does not have half those plugs now that i look at it, like those two that go near the rear turbo.
Theres only 3 wires going to my ignitor on that extention. A two wire to resister, a bigger one, then the main big plug where you can get the tach lead off from.
Theres only 3 wires going to my ignitor on that extention. A two wire to resister, a bigger one, then the main big plug where you can get the tach lead off from.
#5
Lexus Test Driver
Join Date: Apr 2005
Location: South Walton County, FL
Posts: 1,510
Likes: 0
Received 2 Likes
on
2 Posts
Originally Posted by VJ RC51
Very intresting, my 1992 Soarer 1JZ does not have half those plugs now that i look at it, like those two that go near the rear turbo.
Theres only 3 wires going to my ignitor on that extention. A two wire to resister, a bigger one, then the main big plug where you can get the tach lead off from.
Theres only 3 wires going to my ignitor on that extention. A two wire to resister, a bigger one, then the main big plug where you can get the tach lead off from.
#6
Originally Posted by BrownDuckz
Mine is the same.. what's with all those connectors? By the way where in the hell did you get that diagram - that's some underground ****! Where the hell was that when I was doing my swap!
Thread
Thread Starter
Forum
Replies
Last Post