pics of my project
#1
Pole Position
Thread Starter
Join Date: Jul 2005
Location: NJ
Posts: 248
Likes: 0
Received 0 Likes
on
0 Posts
pics of my project
93 NA-T here... details below
pearl white
5 speed
silkroad 12 way adjustable coilovers
spec 6 puck clutch
lightened flywheel
ats 2 way differential
gte metal headgasket
arp headstuds
walbro 255lph
precision 550cc injectors
hks vpc w/mk3 550 chip
apexi safc 2
aem uego wideband
blitz electronic boost controller
jet hot coated custom exhaust manifold
greddy 20g turbo
hks racegate
greddy type rs bov
steel braided oil lines
spearco fmic
boostlogic stainless steel intercooler piping
custom 3 inch stainless steel downpipe
dual 2 1/2 inch exhaust..
anyways, enough talk.. here are the pics
Injectors
headgasket and headstuds
walbro fuel pump
greddy bov
manifold and dump tube
turbo
boostlogic intercooler piping
pearl white
5 speed
silkroad 12 way adjustable coilovers
spec 6 puck clutch
lightened flywheel
ats 2 way differential
gte metal headgasket
arp headstuds
walbro 255lph
precision 550cc injectors
hks vpc w/mk3 550 chip
apexi safc 2
aem uego wideband
blitz electronic boost controller
jet hot coated custom exhaust manifold
greddy 20g turbo
hks racegate
greddy type rs bov
steel braided oil lines
spearco fmic
boostlogic stainless steel intercooler piping
custom 3 inch stainless steel downpipe
dual 2 1/2 inch exhaust..
anyways, enough talk.. here are the pics
Injectors
headgasket and headstuds
walbro fuel pump
greddy bov
manifold and dump tube
turbo
boostlogic intercooler piping
#2
Pole Position
Thread Starter
Join Date: Jul 2005
Location: NJ
Posts: 248
Likes: 0
Received 0 Likes
on
0 Posts
apexi s-afc 2
hks vpc and blitz ebc
wiring harnesses for all the electronics
spearco fmic
ccw classics..
and its all going in this car
looking for mid 400's on pump gas... the lsd and coilovers are already on the car.. should be ready on saturday..
hks vpc and blitz ebc
wiring harnesses for all the electronics
spearco fmic
ccw classics..
and its all going in this car
looking for mid 400's on pump gas... the lsd and coilovers are already on the car.. should be ready on saturday..
Trending Topics
#9
Pole Position
Thread Starter
Join Date: Jul 2005
Location: NJ
Posts: 248
Likes: 0
Received 0 Likes
on
0 Posts
its a ported greddy td06-20g.. The silkroad coilovers are a drift specific coilover... same thing with the ats 2 way lsd... i was going for a moderate streetable setup.. that would be a fun daily driver but still turn out decent numbers at the track..
Originally Posted by JspecSC3
Very nice setup you have there! You are doing an awesome job on your SC. Keep up the great work. What size is that snail? Ive never hear of SilkRoad coilovers for the SC before. Maybe I'll look those up. Keep us posted as far as dyno numbers go.
#10
Where did you pick up the wheels, what size, price, ect?
and how are the coilovers as far as comfort on the street, drop height, any rubbing, quality, ect?
sorry for the long questions and thanks in advance.
oh i almost for got
and how are the coilovers as far as comfort on the street, drop height, any rubbing, quality, ect?
sorry for the long questions and thanks in advance.
oh i almost for got
#11
Pole Position
Thread Starter
Join Date: Jul 2005
Location: NJ
Posts: 248
Likes: 0
Received 0 Likes
on
0 Posts
i bought the wheels off my friend who used to work for a lexus race team.... they were on their race gs for one season.. i paid him $150 for it.. the wheels retail for about $2000... they are 17 by 10.5's in the rear...and i believe 17 by 9's in the front.. The coilovers are really comfortable on the street.. they are fine as long as you dont hit any bumps... There is no rubbing.. As for drop height, its a fully adjustable coilover, so you can adjust it to suit your needs... i'm about 2 inches off the ground in the front and about 4 inches off the ground in the rear.. and thats the lowest setting...
Originally Posted by ATL-SC
Where did you pick up the wheels, what size, price, ect?
and how are the coilovers as far as comfort on the street, drop height, any rubbing, quality, ect?
sorry for the long questions and thanks in advance.
oh i almost for got
and how are the coilovers as far as comfort on the street, drop height, any rubbing, quality, ect?
sorry for the long questions and thanks in advance.
oh i almost for got
#15
Pole Position
Thread Starter
Join Date: Jul 2005
Location: NJ
Posts: 248
Likes: 0
Received 0 Likes
on
0 Posts
ha... i'm so sorry.. we'll definitely have to meet up sometime.. i've been busy between jobs and everything
Originally Posted by soarer213
you suck at responding to emails...haha
anyways-looking good toshi, let me know if you want to sell those ccw's!
btw(car's up and running now)
anyways-looking good toshi, let me know if you want to sell those ccw's!
btw(car's up and running now)