Vibration
#1
Driver
Thread Starter
Join Date: May 2005
Location: PA
Posts: 198
Likes: 0
Received 0 Likes
on
0 Posts
Vibration
Ever since I got my clutch installed it makes a vibration above like 75 mph, which didn't annoy me i've had it now for about 10 months and now it seems the vibrations are starting at like 60 now. I hope nothing is wrong, if the driveshaft wasn't aligned correctly or something could it eventually get worse??
#3
Try re-torqueing the driveshaft bolts, when I changed my clutch, the guy said he torque the bolts but when I checked it out myself the bolts were loose.
So check the bolts, if you can loosen them easily by hand (with a socket wrench), then apply loctite and re-torque them. I think the bolts get torqued to 61lbs. (not positive)
This happened to another member a while back, and he did not know how the bolts came loose either.
It solved my problems.
Good luck
So check the bolts, if you can loosen them easily by hand (with a socket wrench), then apply loctite and re-torque them. I think the bolts get torqued to 61lbs. (not positive)
This happened to another member a while back, and he did not know how the bolts came loose either.
It solved my problems.
Good luck
Thread
Thread Starter
Forum
Replies
Last Post
6SOARER
SC- 1st Gen (1992-2000)
13
04-22-11 08:34 PM